User`s manual

Chapter2AdjustingScreens

●

To perform advanced adjustments

“Color” of the Adjustment menu allows you to congure and save a separate set of color settings for each

mode.

Attention

• It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more after the

monitor power has been turned on, and then adjust the monitor.

• The same image may be seen in different colors on multiple monitors due to their monitor-specic characteristics. Make

ne color adjustment visually when matching colors on multiple monitors.

Note

• The values shown in “%” or “K” are available only as reference.

• Using the “ScreenManager Pro for LCD” allows you to perform the color adjustment by using the mouse and

keyboard of your PC. The adjusted conditions can be stored as the color data to be read in later. (See “Chapter 4 Color

Adjustment” in the User’s Manual for “ScreenManager Pro for LCD”.)

●

Adjustable settings in each mode

The adjustable settings depend on the mode. (Non-adjustable or non-settable function cannot be selected.) The

adjustments or settings made for each mode are applied to all input signals.

√: Adjustable -: Not adjustable

Function

Color Mode

1-User1 2-User2 3-User3 4-Paper

Brightness √ √ √ √

Temperature √ √ √ √

Gamma √ √ √ -

Hue √ √ √ -

Saturation √ √ √ -

OutlineEnhancer √ √ √ √

BlurReduction √ √ √ -

Gain √ √ √ -

BlackLevel √ √ √ -

6Colors √ √ √ -

ColorReset √ √ √ √