Specifications

14 15
ColorNavigator 6 basic functions ColorNavigator 6 advanced functions
Simple and precise calibration with
ColorNavigator 6 software
ColorNavigator 6 software makes calibration both simple
and quick. Just input target values for brightness, white point
and gamma to create an ICC profile within minutes.
Calibrate to preset or user-assigned values
There are preset values available for web content, photography
and printing. Just select one, click ‘Adjust’ and ColorNavigator6
will begin calibrating. This takes the guesswork out of assigning
values for users with limited color management knowledge.
Experienced users can assign the desired values for brightness,
white point and gamma and then calibrate.
See how other devices display color
with media emulation
ColorNavigator 6* emulates the color characteristics of other
media devices such as tablets, smartphones, notebook PCs and
other LCD/CRT monitors. Using a spectrophotometer, ColorNavi-
gator 6 reads the emulated device's color patches as they appear
in a web browser and creates an ICC profile. By using this profile
with a ColorEdge monitor, content creators see how their cus-
tomers view color on their respective devices.
* Media emulation is available with ColorEdge CG monitors only.
Calibrate to the white of your paper or brightness
of your light box
By measuring the white of the paper to be used for printing
with an external sensor, ColorNavigator 6 automatically sets
the target values for brightness and white point according ly.
You can also measure your light box's* brightness and set it
as the target value for calibration to ensure uniform brightness
between your monitor and light box when color proofing.
*Currently supports JUST Color Communicator 1 and 2.
Profile validation
To verify calibration results or check to see how much the
monitor's colors have varied since it was last calibrated,
ColorNavigator 6 measures the monitor's color patches to
determine the difference between the Delta-E value of the
monitor's profile and the values of the monitor that are actually
displayed.
CG series validates RGB and CMYK values. CX and CS series validate
RGB values only.
Import/export adjustment targets
Import and export your post-adjustment target profiles and share
the same target values in multiple usage environments.
Calibrate your monitor to another profile
If you want to conduct color management between monitors
in a workflow, ColorNavigator 6 allows you to load the profile
of an other ColorEdge monitor and use it to calibrate your own.
Switch your profiles as needed
Change the target profile even when ColorNavigator 6 is not
activated. A list of profiles is always instantly accessible. Choose
one and it will be applied to your monitor's settings.
Recalibration reminder
Monitors needs to be recalibrated at regular intervals to maintain
color accuracy. ColorNavigator 6 includes a recalibration
reminder that will appear after a certain number of user-deter-
mined hours. You can receive a reminder without ever starting
ColorNavigator 6 thanks to an LED that lights up on the monitor's
front panel.
Color matching with other monitors
ColorNavigator 6 factors in the different characteristics between
ColorEdge monitors and calibration devices in order to provide
accurate results.
Post-calibration color adjustment
If you need to further fine-tune your colors after calibrating,
ColorNavigator 6 allows you to adjust hue and saturation for
all six primary and secondary colors (R, G, B, C, M, Y) as well
as white point, brightness, black level and gamma.
Manual
adjustment
screen
CONTROL EVERY COLOR
Comfort and convenience Comfort and convenience
Stable image display Stable image display
Predictable color Predictable color
Post production Post production
Commitment to quality Commitment to quality