User's Manual

ManualsBrandsEIZO ManualsComputer MonitorsColorEdge CS2740 26.9" 16:9 Wide Gamut 4K IPS Monitor with EX4 Calibration Sensor

Table Of Contents

Important

Please read this “User’s Manual”, and “PRECAUTIONS” (separate

volume) carefully to familiarize yourself with safe and e󰀨ective

usage.

• Refer to the “Setup Guide” for information on the installation /

connection of the monitor.

• For the latest product information including the “User’s Manual”,

refer to our web site :

www.eizoglobal.com

Color Management LCD Monitor

User’s Manual

Summary of content (49 pages)

PAGE 1
User’s Manual Color Management LCD Monitor Important Please read this “User’s Manual”, and “PRECAUTIONS” (separate volume) carefully to familiarize yourself with safe and effective usage. ••Refer to the “Setup Guide” for information on the installation / connection of the monitor. ••For the latest product information including the “User’s Manual”, refer to our web site : www.eizoglobal.
PAGE 2
Location of Caution Statement This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside this region, the product may not perform as stated in the specifications. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
PAGE 3
Notice for this monitor Aside from general purposes like creating documents, viewing multimedia content, this product is also suited to applications such as graphics creation and digital photo processing, where accurate color reproduction is a priority. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications.
PAGE 4
Cleaning The stains on the cabinet and LCD panel surface can be removed by moistening part of a soft cloth with water. Attention •• Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or LCD panel, and also quality deterioration of the image. •• Never use thinner, benzine, wax, or abrasive cleaner as they may damage the cabinet or LCD panel surface.
PAGE 5
Contents Notice for this monitor.......................................... 3 Cleaning..................................................................... 4 To use the monitor comfortably.............................. 4 Contents.................................................................. 5 Chapter 1 1-1. Introduction........................................ 6 Features.......................................................... 6 ●●User-defined custom key function....................
PAGE 6
Chapter 1 Introduction This chapter describes the features of the monitor and the name of each control. 1-1. Features ●●User-defined custom key function Work efficiency can be improved by assigning frequently used functions to the switches on the front of the monitor. The functions that can be assigned to custom keys are the following: -- Brightness -- Prev. Color Mode -- Information See “Chapter 3 Custom Key Settings” (page 19).
PAGE 7
1-2. Controls and Functions ●●Front 1 2 1. Operation switches Displays menus. Operate the switches according to the operation guide. Touch the switch to display its menu. The switch indicators are lit white when you turn on the power. 2. Power switch Turns the power on or off. Touch the switch to turn the power on. The switch indicator is lit when you turn the power on. The indicator color differs depending on the monitor's operation status.
PAGE 8
●●Rear 3 5 4 6 7 8 9 10 3. Transportation handle 11 12 13 14 15 This handle is used for transportation. Attention •• Firmly grasp and hold the monitor by the bottom while grabbing the handle, and carefully convey the monitor so as not to drop it. 4. Lock button Use this button when removing the stand from the monitor. 5. USB Type-A connector (USB downstream port) Connects to a peripheral USB device. Supports USB 3.1 Gen 1. This is a blue-colored connector. 6.
PAGE 9
1-3. Supported Resolutions The monitor supports the following resolutions.
PAGE 10
Resolution Scan*1 Vertical Version 1.2, Scan Version 1.1*2 Version 1.2 / Frequency YUV*2 3840 x 2160*3 P 24.000 Hz P 24.989 Hz 3840 x 2160*3 P 25.000 Hz 3840 x 2160*3 P 29.970 Hz 3840 x 2160*3 P 29.981 Hz 3840 x 2160*3 P 30.000 Hz 3840 x 2160*3 P 50.000 Hz 3840 x 2160*3 P 59.940 Hz 3840 x 2160*3 *3 P 59.997 Hz 3840 x 2160 3840 x 2160*3 P 60.000 Hz *1 P: Progressive, I: Interlace *2 “Signal Format” (page 35) must be set.
PAGE 11
Vertical 4K 60Hz, YCbCr Scan 4K 30Hz*2 4K 60Hz / 4:4:4 *2 Frequency YUV Resolution Scan*1 1680 x 1050 P 59.883 Hz √ √ 1680 x 1050 P 59.954 Hz √ √ 1920 x 1080 P 23.976 Hz √ √ 1920 x 1080 P 24.000 Hz √ √ 1920 x 1080 P 25.000 Hz √ √ 1920 x 1080 P 29.970 Hz √ √ 1920 x 1080 P 30.000 Hz √ √ 1920 x 1080 P 50.000 Hz √ √ 1920 x 1080 I 50.000 Hz √ √ 1920 x 1080 P 59.940 Hz √ √ 1920 x 1080 I 59.940 Hz √ √ 1920 x 1080 P 59.963 Hz √ √ 1920 x 1080 P 60.
PAGE 12
Vertical 4K 60Hz, YCbCr Scan 4K 30Hz*2 4K 60Hz / 4:4:4 *2 Frequency YUV Resolution Scan*1 2560 x 1440 P 59.951 Hz √ - 8 bit 2560 x 1600 P 59.972 Hz √ - 8 bit 3840 x 2160*3 P 23.976 Hz √ √ 3840 x 2160*3 P 24.000 Hz √ √ 3840 x 2160*3 P 25.000 Hz √ √ 3840 x 2160*3 P 29.970 Hz √ √ 3840 x 2160*3 P 30.000 Hz √ √ 3840 x 2160*3 P 50.000 Hz - √ 8 bit 3840 x 2160*3 P 59.940 Hz - √ 8 bit 3840 x 2160*3 P 60.
PAGE 13
Resolution Scan*1 Vertical Scan Frequency 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1200 1920 x 1200 2048 x 1080 2048 x 1080 2048 x 1152 2560 x 1080 2560 x 1080 2560 x 1080 2560 x 1080 2560 x 1080 2560 x 1080 2560 x 1080 2560 x 1080 2560 x 1440 2560 x 1440 2560 x 1600 3840 x 2160*3 I P I P P I P P P P P P P P P P P P P P P P 50.000 Hz 59.940 Hz 59.940 Hz 59.963 Hz 60.000 Hz 60.000 Hz 59.885 Hz 59.950 Hz 24.000 Hz 48.000 Hz 60.000 Hz 23.976 Hz 24.000 Hz 25.000 Hz 29.
PAGE 14
1-4. Changing the PC Display Settings If the screen is not properly displayed after connecting the monitor to a PC, follow the procedure below to change the PC display settings. ●●Windows 10 1. Right-click anywhere on the desktop except for on icons to display the menu. 2. From the displayed menu, click "Display settings" to display the "Settings" screen. 3.
PAGE 15
●●macOS 1. Select "System Preferences" from the Apple menu. 2. When the "System Preferences" panel is displayed, click "Displays". 3. If there are multiple monitors including the notebook PC screen connected to the computer, open the "Arrangement" tab and confirm that "Mirror displays" is not selected. If it is selected, clear it. 4. Select the "Display" tab, and confirm that "Default for display" of "Resolution" is selected. If it is not selected, select it. This sets the correct resolution.
PAGE 16
Chapter 2 Basic Adjustments/Settings This chapter describes the basic functions that can be set by touching the switches on the front of the monitor. For advanced adjustment and setting procedures using the Setting menu, see “Chapter 4 Advanced Adjustments/Settings” (page 22). 2-1. Switch Operation Method 1. Displaying the operation guide 1. Touch any switch (except ). The operation guide appears on the screen. 2. Setting 1. Touch a switch for setting. The Setting menu appears. 2.
PAGE 17
●●Operation Guide Icons Icon Description Switches the input signal. Switches the color mode. Executes the function assigned to Custom Key 1. Executes the function assigned to Custom Key 2. Displays the Setting menu. Returns to the previous screen. Moves the cursor. Executes the selected operation. Turns the monitor's power on or off. 2-2. Switching Input Signals When a monitor has multiple signal inputs, the signal to display on-screen can be changed.
PAGE 18
●●Display Modes Color Mode Purpose User Select for configuring color settings according to your preference. Adobe® RGB Suitable for color matching with Adobe® RGB compatible peripherals. sRGB Suitable for color matching with sRGB compatible peripherals. CAL1 CAL2 CAL3 CAL4 CAL5 CAL6 CAL7 Displays the screen adjusted by ColorNavigator 7. Note •• Use ColorNavigator 7 to set CAL1 to CAL7. This cannot be changed on the monitor’s Setting menu. •• CAL2 to CAL7 are disabled in the default settings.
PAGE 19
Chapter 3 Custom Key Settings You can assign functions to the custom keys to easily start specified functions. This chapter describes how to operate the custom keys and how to assign functions to the custom keys. 3-1. Basic Operation of the Custom Keys 1. Displaying the operation guide 1. Touch any switch (except ). The operation guide appears. 2. Execute 1. Select or . The function assigned to or is executed.
PAGE 20
2. Use to select "Preferences", and then select . The Preferences menu appears. 3. Use to select "Custom Key", and then select . The Custom Key menu appears. 4. Use to select the custom key to which you want to assign a function, and then select . The menu for assigning a function appears. For more information about these functions, see “Functions that can be Assigned to Custom Keys” (page 21). 5.
PAGE 21
●●Functions that can be Assigned to Custom Keys Function Description Off Disables the custom key even when it is touched. Brightness Set the brightness. For more information, see page 26. Prev. Color Mode You can return to the previous color mode. This is convenient for checking the differences between two color modes. Information You can view the input signal information and color information. The following information is displayed: 1. Resolution / Vertical scan frequency / Color depth 2.
PAGE 22
Chapter 4 Advanced Adjustments/Settings This chapter describes the advanced monitor adjustment and setting procedures using the Setting menu. For the basic setting functions using the switches on the front of the monitor, see "Chapter 2 Basic Adjustments/Settings" (page 16). 4-1. Basic Operation of the Setting Menu 1. Menu display 1. Touch any switch (except ). The operation guide appears. 2. Select . The Setting menu appears.
PAGE 23
2. Adjusting/setting 1. Choose a menu to adjust/set with , and then select . , and then press . , and then select . The Sub menu appears. 2. Choose an item to adjust/set with The Adjustment/Setting menu appears. 3. Adjust/set the selected item with The Sub menu appears. Selecting during adjustment/setting will cancel the adjustment/setting and restore the state prior to making changes. 3. Exiting 1. Select . The Setting menu appears. 2. Select . The Setting menu exits.
PAGE 24
4-2. Setting Menu Functions ●●Signal The signal settings are used to configure advanced settings for input signals, such as the screen display size and color format. Function Input Color Format Settings Auto YUV*1 YUV 4:2:2*2 YUV 4:4:4*2 RGB Description The color space of the input signal can be specified. Try changing this setting if colors are not displayed correctly. Normally, select "Auto".
PAGE 25
Function Settings Description YUV Color Matrix Auto BT.601 BT.709 BT.2020 Select the YUV format of the input signal. Use this setting for gradation collapse or other occurrences where the screen is displayed incorrectly because of a problem with the input signal. Input Range Auto Full Limited (109% white) Limited Depending on the external device, the black and white levels in the video signal output to the monitor may be restricted.
PAGE 26
●●Color When the screen is displayed in User / Adobe® RGB / sRGB, you can adjust the color settings of each color mode according to your preference. Attention •• The same image may be seen in different colors on multiple monitors due to differences between individual monitors. Make fine color adjustment visually when matching colors on multiple monitors. Note •• Use the values shown in "cd/m2 " and "K" as a guide only.
PAGE 27
Function Gamma Settings 1.6 to 2.7 sRGB Description Adjust the gamma. The brightness of the monitor varies depending on the input signal, however, the variation rate is not simply proportional to the input signal. The control performed to keep the balance between the input signal and the brightness of the monitor is called "Gamma correction". Set the gamma, or select a standard name. Color Gamut Native Adobe® RGB sRGB Set the color reproduction area (color gamut).
PAGE 28
Function Settings Advanced Hue Settings -100 to 100 Description The hue can be adjusted. Note •• Using this function may make some color gradations unavailable for display. Saturation -100 to 100 The saturation can be adjusted. Note •• Using this function may make some color gradations unavailable for display. •• The minimum value (-100) changes the screen to monochrome.
PAGE 29
●●Screen Set the screen display size. Function Picture Expansion Settings Auto Full Screen Aspect Ratio Dot by Dot Description The screen size of the monitor display can be changed. •• "Auto" The monitor automatically changes the screen size according to the resolution information and aspect ratio information from the input signal (only for HDMI input). •• "Full Screen" Displays an image in full screen.
PAGE 30
●●Preferences The monitor's settings can be configured to suit the usage environment or personal preference. Function Menu Rotation Settings 0° 90° Description This function allows you to change the orientation of the Setting menu to align with the installation orientation. Note •• When using the monitor screen in a portrait position, the graphics board supporting portrait display is required. When placing the monitor in a portrait position, settings of your graphics board need to be changed.
PAGE 31
Function Settings Description Indicator Off 1 to 7 The brightness of the power switch and the operation switches when the screen is displayed can be set. (Default setting: 4) Beep On Off You can set the beep that sounds each time a switch is operated. Input Skip Skip - This function allows skipping of input signals that will not be used when the input signals are switched. Note •• Not all input signals can be set to "Skip".
PAGE 32
●●Languages The display language for menus and messages can be selected. Settings English, German, French, Spanish, Italian, Swedish, Japanese, Simplified Chinese, Traditional Chinese ●●Information You can check the monitor information (model name, serial number (S/N), firmware version, usage time) and the input signal information.
PAGE 33
Chapter 5 Administrator Settings This chapter describes how to configure monitor operation using the "Administrator Settings" menu. 5-1. Basic Operation of the "Administrator Settings" Menu 1. Menu display 1. Touch to turn off the monitor. 2. While touching the leftmost switch, touch for more than 2 seconds to turn on the monitor. The "Administrator Settings" menu appears. 2. Setting 1. Choose an item to set with , and then select . The Adjustment/Setting menu appears. 2.
PAGE 34
3. Applying and exiting 1. Select "Apply", and then select . The settings are confirmed and the "Administrator Settings" menu quits. 5-2. "Administrator Settings" Menu Functions Function Auto Input Detection Settings Off On Description When this function is set to "On", the monitor automatically recognizes the connector through which signals are input, so that the screen can be displayed. If the input signal for the selected connector is lost, the monitor automatically switches to a different signal.
PAGE 35
Function DUE Priority Settings Uniformity Brightness Description This product is equipped with a Digital Uniformity Equalizer (DUE) function that reduces display unevenness. This DUE setting can be changed. •• "Uniformity" Prioritizes reduction of display unevenness. •• "Brightness" Prioritizes high brightness and high contrast. Note •• When changing the DUE setting, the monitor whose display is adjusted must be re-calibrated. Perform the calibration again.
PAGE 36
Chapter 6 Troubleshooting 6-1. No Picture Problem 1. No picture •• Power indicator does not light up. •• •• •• •• Check whether the power cord is connected properly. Turn on the main power switch on the rear side of the monitor. Touch . Turn off the main power switch on the rear side of the monitor, and then turn it on again a few minutes later. •• Power indicator is lighting white. •• Increase "Brightness" and/or "Gain" in the Setting menu (see “Color” (page 26)).
PAGE 37
6-2. Imaging Problems Problem Possible cause and remedy 1. The screen is too bright or too dark. •• Use "Brightness" in the Setting menu to adjust it (see “Color” (page 26)). The LCD monitor backlight has a limited life span. If the screen becomes dark or begins to flicker, contact your local EIZO representative. 2. Afterimages appear •• Afterimages are particular to LCD monitors. Avoid displaying the same image for a long time.
PAGE 38
6-3. Other Problems Problem 38 Possible cause and remedy 1. The Setting menu/Mode menu cannot be displayed •• Check whether the operation switch lock function works (see “Key Lock” (page 34)). •• Control switches are locked when the main window of ColorNavigator 7 is displayed. Exit the software. 2. The monitor connected with the USB cable is not detected. / The peripheral USB device connected to the monitor does not work. •• Check whether the USB cable is connected correctly (see “8-3.
PAGE 39
Chapter 7 Attaching/Detaching the Stand 7-1. Removing the Stand The stand section of this product can be removed. Attention •• Do not move the removed stand up and down. Doing so may result in injury or equipment damage. •• Since the monitor and stand are heavy, dropping them may result in injury or equipment damage. 1. To prevent damaging the LCD panel surface, lay the monitor with its LCD panel surface facing down on a soft cloth spread on a stable surface. 2. Remove the stand.
PAGE 40
7-2. Attaching the Optional Arm An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our web site for the corresponding optional arm (or optional stand). www.eizoglobal.com Attention •• When attaching an arm or stand, follow the instructions of their User's Manual. •• When using another manufacturer's arm or stand, confirm the following in advance and select one conforming to the VESA standard.
PAGE 41
Chapter 8 Reference 8-1. Attaching/Detaching the Cable Holder A cable holder is supplied with this product. Use the cable holder to organize the cables connected to the monitor. Attachment procedure 1. Pass the cables through the cable holder. 2. Close the cable holder. 3. In this state, insert the cable holder into the stand. Note •• The cable holder can be inserted either perpendicular or parallel to the stand. Change the orientation of the cable holder in line with the direction of the cables.
PAGE 42
Detachment procedure 1. Close the cable holder. 2. In this state, pull the cable holder from the stand.
PAGE 43
8-2. Connecting Multiple External Devices The product allows you to connect multiple external devices and switch between them for display. Connection examples HDMI HH200PR(HDMI - HDMI) HDMI DisplayPort PP200 (DisplayPort - DisplayPort) DisplayPort USB Type-C CC200SS (USB Type-C - USB Type-C) USB Type-C Note •• The input signal changes each time the operation switch ( ) on the front of the monitor is touched. For more information, see "2-2. Switching Input Signals" (page 17).
PAGE 44
8-3. Making Use of the USB Hub Function This monitor is equipped with a USB hub. It works as a USB hub when connected to a USB-compatible external device, allowing the connection of peripheral USB devices. The USB hub function supports both USB cables (UU200SS) and USB Type-C cables (CC200SS). ●●Connection Procedure 1. Connect the USB cable between the USB downstream port of the external device and the USB upstream port (USB Type-B connector or USB Type-C connector) of the monitor.
PAGE 45
8-4. Specifications LCD Panel Type IPS (Anti-Glare) Backlight Wide color gamut LED Size 68.4 cm (26.9 inch) Resolution 3840 dots x 2160 lines Display Size (H x V) 596.2 mm x 335.3 mm Pixel Pitch 0.155 mm x 0.155 mm Pixel Density 164 ppi Display Colors Approx. 1073.
PAGE 46
Physical Specifications Outside Dimensions Minimum Height 638 mm x 404.1 mm x 265 mm (W x H x D) (Tilt: 0˚) Maximum Height 638 mm x 570 mm x 269.1 mm (W x H x D) (Tilt: 35˚) Outside Dimensions (Without Stand) 638 mm x 378.2 mm x 75 mm (W x H x D) Net Weight Approx. 10.3 kg Net Weight (Without Stand) Approx. 6.
PAGE 47
Appendix Trademark The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries. The DisplayPort Compliance Logo and VESA are registered trademarks of the Video Electronics Standards Association. The SuperSpeed USB Trident Logo is a registered trademark of USB Implementers Forum, Inc. The USB Power Delivery Trident Logos are trademarks of USB Implementers Forum, Inc.
PAGE 48
Information for Radio Interference For U.S.A., Canada Only FCC Supplier’s Declaration of Conformity We, the Responsible Party EIZO Inc. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product Trade name: EIZO Model: ColorEdge CS2740 is in conformity with Part 15 of the FCC Rules.