Manualshelf

User Manual

ManualsBrandsEizo ManualsComputer MonitorsColorEdge CS2730 27" 16:9 IPS Monitor with EX3 Calibration Sensor
31323334353637383940
40
Chapter 6 Reference
●
Connection Procedure (Setup of USB Function)
1. Connect the monitor rst to a PC using the signal cable, and start the PC.
2. Connect the USB cable between the USB downstream port of the PC and USB upstream port 1 of
the monitor.
The USB hub function is set up automatically upon connection of the USB cable.
3. Connect the peripheral USB device to the USB downstream port of the monitor.
Note
• In the default settings, USB upstream port 1 is enabled. When connecting two PCs, see “USB Selection”
(page 25).
See “USB CHARGE Port” (page 24)
USB upstream
port
USB downstream port