User Manual

21
Chapter 3 Advanced Adjustments/Settings
●
Signal
The signal settings are used to congure advanced settings for input signals, such as the screen
display size and color format.
Function Adjustable Range Description
Picture Expansion Auto
*1
Full Screen
Aspect Ratio
Dot by Dot
The screen size of the monitor display can be changed.
• "Auto"
The monitor automatically changes the screen size
according to the resolution information and aspect ratio
information from the input signal.
• "Full Screen"
Displays an image in full screen. Images are distorted in
some cases because the vertical rate is not equal to the
horizontal rate.
• "Aspect Ratio"
Displays an image in full screen. However, since aspect
ratios are maintained, part of an image may not be visible
in horizontal or vertical direction.
• "Dot by Dot"
Displays the image at the set resolution or at the size
specied by the input signal.
Note
• Example settings
- Full Screen
- Aspect Ratio
- Dot by Dot
(Input Signal)
*1 Only enabled when input signal information according to which the setting can be automatically
determined is detected during HDMI input