Important Please read PRECAUTIONS, this User’s Manual, and the Setup Guide (separate volume) carefully to familiarize yourself with safe and effective usage. • Please refer to the Setup Guide for basic information ranging from connection of the monitor to a PC to using the monitor. • The latest User’s Manual is available for download from our web site: http://www.eizo.
Location of Caution Statement Ex. CX240 This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside this region, the product may not perform as stated in the specifications. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.
Notice for this monitor Aside from general purposes like creating documents, viewing multimedia content, this product is also suited to applications such as creations of images and graphics, and digital photo processing, where accurate color reproduction is a priority. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications.
Cleaning Attention • Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or panel, and also quality deterioration of the image. • Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel. Note • The optional ScreenCleaner is recommended for cleaning the cabinet and panel surface. If necessary, the stains on the cabinet and panel surface can be removed by moistening part of a soft cloth with water.
CONTENTS Cover....................................................................... 1 2-7. Configuring Moving Image Performance.. 30 Notice for this monitor.......................................... 3 2-8. Specifying Color Space...............................31 Cleaning..................................................................... 4 2-9. Setting HDMI..................................................31 To use the monitor comfortably.............................. 4 CONTENTS.................
●●Procedure....................................................... 48 7-4. Showing Monitor Information.................... 49 ●●Displaying signal information “Signal Info”.... 49 ●●Displaying Monitor Information “Monitor Info”................................................................ 49 7-5. Specifications.............................................. 50 7-6. Preset Timing............................................... 54 7-7. Glossary........................................................
Chapter 1 Introduction 1-1. Features • • • • • • • • 23.0″ wide format LCD (CS230) 24.1″ wide format LCD (CX240) Wide color gamut of 97% of Adobe RGB (CX240 only) Applicable to the resolution of 1920 × 1080 (CS230). Applicable to the resolution of 1920 × 1200 (CX240). IPS panel with 178˚ horizontal and vertical viewing angles Frame synchronization mode supported (23.75 - 30.5Hz, 47.5 - 61.
Attention Be careful of the following points when using the built-in correction sensor. Do not touch the built-in correction sensor. It may reduce the measurement accuracy of the built-in correction sensor, or result in injury or equipment damage. Attention • A high temperature or high humidity environment may affect the measurement accuracy of the built-in correction sensor. We suggest storing and using the monitor under the following conditions.
1-2. Controls and Functions 1 Adjustment menu*1 15 16 17 2 3 4 5 6 1. Built-in correction sensor 7 8 9 1011 12 1314 Executes display correction for an independent monitor. SelfCorrection function (page 37) 2. Ambient Light Sensor Measures ambient light. 3. Switches input signals for display (page 47). button button 4. button 5. 6. button button 7. 8. button Changes Color Mode (page 17). Cancels the setting/adjustment and exits the Adjustment menu.
1-3. EIZO LCD Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with this product. The following table shows the disk contents and the overview of the software programs. ●●Disk contents and software overview The disk includes application software programs for adjustment, and User’s Manual. Refer to “Readme.txt” or the “read me” file on the disk for software startup procedures or file access procedures.
1-4. Basic Operations and Functions ●●Basic Adjustment menu operations 1. Displaying Adjustment Menu 1. Press . The Adjustment menu appears. Menu title Current mode Item Setting Menu 2. Adjusting/Setting 1. Choose a menu to adjust/set with , , and then press . 2. Choose an item to adjust/set with , , and then press . 3. Adjust/set the selected item with , , and then press . 3. Exiting the software 1. Press a few times. The Adjustment menu finishes.
●●Showing Button Guide Press the front buttons (except button), the button guide appears above the button. (When using the monitor with “Portrait” position, the button guide appears next to the button.) Button Guide Control button Note • The button guide will continue to appear while the Adjustment menu or Mode menu is showing. • The button guide is displayed differently depending on the selected menu or status.
●●Functions The following table shows all the Adjustment menu’s adjustment and setting menus. Main Menu Color*1 Item Reference “2-3. Adjusting Color” (page 17) Brightness Temperature Gamma Advanced Settings Hue Saturation Contrast Enhancer Outline Enhancer Clipping Gain 6 Colors Color Reset “3-10. Reset to default” (page 35) SelfCorrection Execute “4-1. Executing SelfCorrection” (page 37) Screen Screen Size “2-6. Selecting Screen Size” (page 28) Overdrive “2-7.
Tools Input Selection “To switch among input signals” (page 47) Mode Preset “3-1. Enabling/Disabling Mode Selection” (page 32) USB Selection DVI “3-8. Switching USB Port Automatically” (page 34) DisplayPort HDMI Signal Info “7-4. Showing Monitor Information” (page 49) Monitor Info All Reset “3-10. Reset to default” (page 35) *1 The adjustment/settings available on the “Color” menu depend on the selected mode. (See “2-3.
Chapter 2 Adjusting Screens 2-1. Compatible Resolutions The monitor supports the following resolutions. ●●Analog Input (DVI-I) Resolution Applicable Signals 640 × 480 720 × 400 800 × 600 1024 × 768 1280 × 960 1280 × 1024 1600 × 1200 1680 × 1050 1920 × 1080*1 1920 × 1080*1 1920 × 1200 *2 VGA VGA TEXT VESA VESA VESA VESA VESA VESA CVT, VESA CVT RB VESA CVT RB CEA-861 VESA CVT RB Vertical scan frequency 60 Hz 70 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz Dot clock (Max.) CS230 CX240 149.
2-2. Setting the Resolution When you connect the monitor to the PC and find that the resolution is improper, or when you want to change the resolution, follow the procedure below. ●●Windows 7 1. Right-click the mouse anywhere on the desktop except for icons. 2. From the displayed menu, click “Screen resolution”. 3. On the “Screen Resolution” dialog box, select the monitor. 4. Click “Resolution” to select the desired resolution. 5. Click the “OK” button. 6.
2-3. Adjusting Color ●●To select the display mode (color mode) This function allows easy selection of a desired mode according to monitor application. Display Modes Mode CS230 Purpose CX240 1-User1 1-User1 2-User2 2-User2 Available for the color settings according to your preference. 3-User3 3-User3 4-Paper 4-Paper Produces a printed paper effect. Suitable for displaying images from media such as books and documents.
●●To perform advanced adjustments “Color” of the Adjustment menu allows you to configure and save a separate set of color settings for each mode. Attention • As it takes about 30 minutes (CS230) / 7 minutes (CS240: under our measurement conditions) for the performance of electrical parts to stabilize, adjust the monitor 30 minutes (CS230) / 7 minutes (CX240) or more after the monitor power has been turned on.
●●Adjusting Brightness The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD back panel). Setting Range 50 cd/m 2 to 300 cd/m2 Procedure 1. Press or . The Brightness menu appears. 2. Use or for adjustment. to exit. 3. Press Attention • If the entered value cannot be set, the value will appear in magenta. In such a case, change the value. Note • Alternatively, you can use “Brightness” under “Color” in the Adjustment menu to adjust it.
●●Adjusting Gamma Gamma can be adjusted. The brightness of the monitor varies depending on the input signal, however, the variation rate is not proportional to the input signal. To keep the balance between the input signal and the brightness of the monitor is called as “Gamma correction”. Setting Range 1.6-2.7, Standard Procedure . 1. Choose “Color” from the Adjustment menu, and press 2. Choose “Gamma” from “Color”, and press 3. Use or . for adjustment. to exit. 4.
●●Adjusting Saturation This function allows you to adjust color saturation. Setting Range -100 to 100 Procedure . 1. Choose “Color” from the Adjustment menu, and press 2. Choose “Advanced Settings” from “Color”, and press 3. Choose “Saturation”, and press 4. Use or 5. Press . . for adjustment. to exit. Attention • Using this function may make some color gradations unavailable for display. Note • The minimum value (-100) changes the screen to monochrome.
●●To set clipping This function allows you to display the monitor with the colors based on the standard values of the defined color gamut (such as sRGB). The method of displaying the defined color gamut outside the normal gamut of the monitor can be set. Procedure . 1. Choose “Color” from the Adjustment menu, and press 2. Choose “Advanced Settings” from “Color”, and press 3. Choose “Clipping”, and press 4. Select “On” or “Off” with . . or . On: Displays colors based on the standard values.
●●Adjusting Gain The brightness of each color component red, green, and blue is called Gain. You can change the hue of “white” by adjusting gain. Setting Range 0% to 100% Procedure . 1. Choose “Color” from the Adjustment menu, and press 2. Choose “Advanced Settings” from “Color”, and press 3. Choose “Gain”, and press . . 4. Choose the color for adjustment from “Red”, “Green”, and “Blue”, and press 5. Use or . for adjustment. to exit. 6.
2-4. Adjusting Screens ●●Digital Signal Input When digital signals are input, images are displayed correctly based on the preset data of the monitor, but if you perform more advanced adjustment, see “2-3. Adjusting Color” (page 17) and subsequent pages.
2. Prepare to use analog screen adjustment patterns. Load the “EIZO LCD Utility Disk” to your PC, and then open the “Screen adjustment pattern files”. Note • For details and instructions on opening the “Screen adjustment pattern files”, refer to the Readme.txt file. 3. Perform the auto adjustment again with the analog screen adjustment pattern displayed. ●●To adjust flickering, screen position, and screen size automatically Procedure 1.
●●To remove flickering or blurring Procedure . 1. Choose “Analog Adjustment” from “Screen”, and press 2. Choose “Phase” from “Analog Adjustment”, and press . The “Phase” menu appears. 3. Adjust the phase with 4. Press or to minimize flickering or blurring. to exit. When vertical bars appear on the screen after adjustment, go back to “To eliminate vertical bars”. (Clock → Phase → Position) Attention • Flickering or blurring may not be eliminated depending on your PC or graphics board.
5. Adjusting color gradation. ●●To adjust color gradation automatically Every color gradation (0 to 255) can be displayed by adjusting the signal output level. Procedure 1. Display Pattern 2 in full screen on the monitor using the “Screen adjustment pattern files”. 2. Choose “Screen” from the Adjustment menu, and press . 3. Choose “Analog Adjustment” from “Screen”, and press . 4. Choose “Range Adjustment” from “Analog Adjustment”, and press . The output range is set automatically. 5.
2-6. Selecting Screen Size The image with the resolution other than the recommended resolution is displayed in full screen automatically. You can change the screen size by using the “Screen Size” function from “Screen”. ●●DVI, DisplayPort signal input Settings Function Full Displays an image in full screen. Images are distorted in some cases because the vertical rate is not equal to the horizontal rate. Enlarged Displays an image in full screen.
●●HDMI (HD signal) input Settings Function Enlarged Displays an image in full screen. In some cases, a blank horizontal or vertical border appears to equalize the vertical rate and the horizontal rate. Dot by Dot Displays images with the specified resolution. Example: 720p Enlarged Dot by Dot CS230 CX240 Procedure . 1. Choose “Screen” from the Adjustment menu, and press 2. Choose “Screen Size” from “Screen”, and press 3. Select “Enlarged”, or “Dot by Dot” with 4. Press . or . to exit.
●●HDMI (SD signal) input Settings Function Auto The monitor automatically changes the screen size according to the aspect ratio sent from the auto input signal. 4:3 Displays images in a 4:3 format screen.Black bars appear on both sides of the screen. 16:9 images are horizontally compressed. Letter Box Displays 16:9 letterboxed images in full screen. Images other than the letterboxed ones are partly cut on top and bottom. 16:9 Displays the entire 16:9 image in full screen.
2-8. Specifying Color Space The color space of the input signal is specified. Set to other than “Auto” if this product cannot display correct color. Settings Function Auto Identifies the color space of the input signal automatically. YUV 4:2:2 Converts the color space of the input signal to a YUV 4:2:2 format. YUV 4:4:4 Converts the color space of the input signal to a YUV 4:4:4 format. RGB Converts the color space of the input signal to an RGV format. Procedure . 1.
Chapter 3 Setting Monitor 3-1. Enabling/Disabling Mode Selection Allows you to select the specified modes only. Use this function when all the display modes are not available or when keeping the display mode unchanged. Procedure . 1. Choose “Tools” from the Adjustment menu, and press 2. Choose “Mode Preset” from “Tools”, and press 3. Use or to select the mode to change, and press 4. Select “On” or “Off” with 5. Press . . or . to exit. Attention • You cannot set all the modes disable.
3-4. Changing Adjustment Menu Display Position You can change the display position of the Adjustment menu. Procedure . 1. Choose “Menu Settings” from the Adjustment menu, and press . 2. Choose “Menu Position” from “Menu Settings”, and press 3. Choose the position with or . to exit. 4. Press 3-5. Showing and Hiding the EIZO Logo Procedure 1. Press to turn off the monitor. down, press 2. Holding for at least two seconds to turn on the monitor. The “Optional Settings” menu appears. 3.
3-7. Setting Signal Bandwidth The range of frequency and detection sensitivity of the change in signal can be switched. Attention • This function cannot be used with HDMI input. Procedure 1. Press to turn off the monitor. down, press 2. Holding for at least two seconds to turn on the monitor. The “Optional Settings” menu appears. 3. Choose “Signal Bandwidth” from “Optional Settings”, and press 4. Choose the input signal to set with 5. Select “Normal” or “Wide” with . or , and press . twice. 6.
3-9. Changing DUE (Digital Uniformity Equalizer) Setting The DUE setting can be changed. Settings Function Brightness Makes the brightness and color of the whole screen uniform without changing the maximum brightness and contrast ratio. The brightness of a high gradation area is not corrected. Select this setting to prioritize the levels of the brightness and contrast over the uniformity in the high gradation area. Uniformity (Default setting) Makes the brightness and color of the whole screen uniform.
●●To reset all adjustments to the default settings This function resets all adjustments to the default settings (except the “Optional Settings” menu and “USB Selection”). Procedure 1. Choose “Tools” from the Adjustment menu, and press 2. Choose “All Reset” from “Tools”, and press 3. Select “Execute” with 4. Press 36 . Chapter 3 Setting Monitor or . . .
Chapter 4 SelfCorrection This product is equipped with a built-in correction sensor. The conditions that have been adjusted using ColorNavigator and the measurement device, or ColorNavigator Elements can be maintained. As the adjustment targets or interval times for SelfCorrection are set in advance using ColorNavigator or ColorNavigator Elements, the built-in correction sensor automatically executes regular display correction.
Chapter 5 Power Saving Functions 5-1. Setting Power Save This function allows you to set the monitor into the power saving mode according to the PC status. When the monitor has shifted to the power saving mode, the images on the screen are not displayed. Attention • Turning off the main power switch or unplugging the power cord completely shuts off power supply to the monitor.
5-2. Enabling/Disabling Automatic Brightness Adjustment The ambient light sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness automatically and comfortably by using the Auto EcoView function. Attention • Be careful not to block the ambient light sensor on the lower side of the monitor when using the Auto EcoView function. • Auto EcoView cannot be used when ColorNavigator and/or ColorNavigator Elements is used. Procedure . 1.
5-5. Setting USB Power Save This function allows you to disable the USB connection according to the power saving mode of the monitor. Attention • When both the USB upstream port and the USB downstream port are connected to USB devices, the USB connection is not disabled even when “USB Power Save” is set to “On”. Procedure 1. Press to turn off the monitor. down, press 2. Holding for at least two seconds to turn on the monitor. The “Optional Settings” menu appears. 3.
Chapter 6 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local EIZO representative. 6-1. No picture Problem 1. No picture • Power indicator does not light. • Power indicator is lighting blue. • Power indicator is lighting orange. • Power indicator flashes orange and blue. 2. The message below appears. Possible cause and remedy • • • • Check whether the power cord is connected properly. Turn the main power switch on. Press .
6-2. Imaging problems Problem 42 Possible cause and remedy 1. The screen is too bright or too dark. • Use “Brightness” in the Adjustment menu to adjust it. (The LCD monitor backlight has a limited life span.) When the screen becomes dark or begins to flicker, contact your local EIZO representative. 2. Characters are blurred. • Check whether the PC is configured to meet the resolution and vertical scan frequency requirements of the monitor (see “2-1. Compatible Resolutions” (page 15)).
6-3. Other problems Problem Possible cause and remedy 1. The adjustment menu does not appear. • Check whether the operation lock function is active (see “3-6. Locking Operation Button” (page 33)). 2. No mode menu is displayed. • Check whether the operation lock function is active (see “3-6. Locking Operation Button” (page 33)). 3. The monitor connected with the USB cable is not detected. / USB devices connected to the monitor does not work.
6-4. Built-in correction sensor and SelfCorrection problems Problem Possible cause and remedy 1. The built-in correction sensor does not come out/stays out. • Turn off the main power, and then turn it on again a few minutes later. 2. SelfCorrection cannot be executed. • Check whether the ColorNavigator license is certified. (See “To use ColorNavigator / ColorNavigator Elements” (page 10).) • Set the SelfCorrection target using ColorNavigator or ColorNavigator Elements. 3.
Chapter 7 Reference 7-1. Attaching the Optional Arm An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our web site for the corresponding optional arm (or optional stand). http://www.eizo.com Attention • When attaching an arm or stand, follow the instructions of their User’s Manual. • When using another manufacturer’s arm or stand, confirm the following in advance and select one conforming to the VESA standard.
7-2. Connecting Multiple External Devices The product has multiple connections to external devices and allows you to switch to one of the connections for display. Connection examples DVI- I connector Digital (DVI) Digital (HDMI) Signal cable (supplied FD-C39) HDMI cable (Commercially available product) *1 DVI connector HDMI connector To external device 1 To external device 2 *1 Use a product able to handle High Speed .
●●To switch among input signals The input signal switches each time is pressed. When the signal is switched, the active input port name appears at the top right corner of the screen. ●●To set input signal selection “Input Selection” Settings Function Auto The monitor recognizes the connector through which signals are input. When an external device enters the power saving mode, the monitor automatically displays another signal.
7-3. Making Use of USB (Universal Serial Bus) This monitor has a USB hub. Connected to a PC compatible with USB, this monitor functions as a USB hub allowing connection to peripheral USB devices. ●●System Requirement • A PC equipped with a USB port. • Windows 2000/XP/Vista/7 or Mac OS 9.2.2 and Mac OS X 10.2 or later • USB cable Attention • This monitor may not work depending on PC, OS or peripheral devices. For USB compatibility of peripheral devices, contact their manufacturers.
7-4. Showing Monitor Information ●●Displaying signal information “Signal Info” This function displays the information about the current input signals displayed. Procedure . 1. Choose “Tools” from the Adjustment menu, and press 2. Choose “Signal Info” from “Tools”, and press . The “Signal Info” appears. (Example) ●●Displaying Monitor Information “Monitor Info” This function displays the information about the monitor. Procedure . 1. Choose “Tools” from the Adjustment menu, and press 2.
7-5. Specifications ●●CS230 LCD Panel Size 23.0 inch (580 mm) Type Color TFT, IPS, LED backlight Surface treatment Hard Coating Surface hardness 3H Viewing angles Horizontal 178˚, vertical 178˚ (CR≥10) Dot pitch 0.265 mm Response time Horizontal scan Analog frequency Digital Approx. 10.5 ms 26 kHz - 68 kHz Analog Digital Approx. 15.2 ms DVI / 26 kHz - 68 kHz DisplayPort HDMI Vertical scan frequency Black-white-black: Gray-to-gray: 15 kHz - 68 kHz 47.
Environmental conditions USB ●●CX240 LCD Panel Temperature Operating: Storage/Transportation: -20˚C to 60˚C (-4˚F to 140˚F) Humidity Operating: 20% to 80% R.H. (no condensation) Storage/Transportation: 10% to 90% R.H. (no condensation) Air pressure Operating: 700 hPa to 1060 hPa Storage/Transportation: 200 hPa to 1060 hPa Standard USB Specification Revision 2.0 Port Upstream port × 2, Downstream port × 2 Communication Speed 480 Mbps (high), 12 Mbps (full), 1.
Mass Main unit Approx. 9.7 kg (21.4 lbs.) Main unit (without stand) Approx. 7.0 kg (15.4 lbs.) Movable range Environmental conditions Tilt: Temperature Humidity Air pressure USB Up 30˚, down 0˚ Swivel: 344˚ Adjustable height: 195 mm (128 mm for tilt of 0˚) Rotation: 90˚ (clockwise) Operating: 0˚C to 35˚C (32˚F to 95˚F) Storage/Transportation: -20˚C to 60˚C (-4˚F to 140˚F) Operating: 20% to 80% R.H. (no condensation) Storage/Transportation: 10% to 90% R.H.
Outside Dimensions CS230 Unit: mm (inch) 344° SWIVEL 75 (2.95) 544 (21.4) 511.8 (20.1) 38 (1.50) 100 (3.9) TILT 3 372.5∼526.5 (14.7) 288.8 (11.4) 353 (13.9) 0° 100 (3.9) 15 (0.59) 7.5 (0.30) 33.7 (1.33) 209.5 (8.2) 245.5 (9.7) CX240 Unit: mm (inch) 38 (1.50) 75 (2.95) 516.2 (20.3) 344° SWIVEL 273.5 (10.8) 27.3 (1.07) TILT30 ° 42 (1.65) 209 (8.2) 245.5 (9.7) 237.5 (9.4) 157.7 (6.2) 100 (3.9) 140.3 (5.5) 100 (3.9) 125 (4.9) 7.5 (0.30) 378.5 (14.9) 320 (12.6) 360.5 (14.2) 14.5 (0.
7-6. Preset Timing The following table shows factory preset analog signal timing. Attention • Display position may be deviated depending on the PC connected, which may require screen adjustment using Adjustment menu. • If a signal other than those listed in the table is input, adjust the screen using the Adjustment menu.However, screen display may still be incorrect even after the adjustment.
7-7. Glossary Adobe®RGB This is a definition of the practical RGB color space proposed by Adobe Systems in 1998. The color reproduction range (color gamut) is broader than sRGB, and is highly adaptable to such fields as printing etc. Clock The analog signal input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog signal is converted to a digital signal for image display. This is called clock adjustment.
HDCP (High-bandwidth Digital Content Protection) Digital signal coding system developed to copy-protect the digital contents, such as video, music, etc. This helps to transmit the digital contents safely by coding the digital contents sent via the DVI or HDMI connector on the output side and decoding them on the input side. Any digital contents cannot be reproduced if both of the equipments on the output and input sides are not applicable to HDCP system.
Appendix Trademark The DisplayPort Compliance Logo and VESA are registered trademark of the Video Electronics Standards Association. Windows, Windows Vista, Windows Media, SQL Server, and Xbox 360 are registered trademarks of Microsoft Corporation in the United States and other countries. Apple, Mac, Macintosh, iMac, eMac, Mac OS, MacBook, PowerBook, ColorSync, QuickTime, and iBook are registered trademarks of Apple Inc.
FCC Declaration of Conformity For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZONANAOTECHNOLOGIESINC. 5710WarlandDrive,Cypress,CA90630 Phone:(562)431-5011 declare that the product Tradename:EIZO Model:ColorEdgeCS230/CX240 is in conformity with Part 15 of the FCC Rules.
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden.
LIMITED WARRANTY LIMITED WARRANTY EIZO NANAO CORPORATION (hereinafter referred to as “EIZO”) and distributors authorized by EIZO (hereinafter referredtoasthe“Distributors”)warrant,subjecttoandinaccordancewiththetermsofthislimitedwarranty(hereinafter referred to as the “Warranty”), to the original purchaser (hereinafter referred to as the “Original Purchaser”) who purchasedtheproductspecifiedinthisdocument(hereinafterreferredtoasthe“Product”)from
BEGRENZTE GARANTIE EIZONANAOCORPORATION(imWeiterenals„EIZO“bezeichnet)unddieVertragsimporteurevonEIZO(imWeiteren als „Vertrieb(e)“ bezeichnet) garantieren dem ursprünglichen Käufer (im Weiteren als „Erstkäufer“ bezeichnet), der dasindiesemDokumentvorgegebeneProdukt(imWeiterenals„Produkt“bezeichnet)vonEIZOodereinemVertrieb erworbenhat,gemäßdenBedingungendieserbeschränktenGarantie(imWeiterenals„Garantie“bezeichnet),dass EIZO und der Vertrieb nach
GARANTIE LIMITÉE EIZO NANAO CORPORATION (ci-après dénommé « EIZO ») et les distributeurs autorisés par EIZO (ci-après dénommés«Distributeurs »),sousréserveetconformémentauxtermesdecettegarantielimitée(ci-aprèsdénommée « Garantie »), garantissent à l’acheteur initial (ci-après dénommé « Acheteur initial ») du produit spécifié dans la présente (ci-après dénommé « Produit ») acheté auprès d’EIZO ou de Distributeurs agréés EIZO, que EIZO et ses Distri
GARANTÍA LIMITADA EIZO NANAO CORPORATION (en lo sucesivo “EIZO”) y sus distribuidores autorizados (en lo sucesivo los “Distribuidores”),conarregloydeconformidadconlostérminosdeestagarantíalimitada(enlosucesivola“Garantía”), garantizanalcompradororiginal(enlosucesivoel“Comprador original”)quecompróelproductoespecificadoeneste documento(enlosucesivoel“Producto”)aEIZOoasusDistribuidores,queEIZOysusDistribuidores,asupropio criterio,repararán
GARANZIA LIMITATA EIZONANAOCORPORATION(acuisifaràriferimentodaquiinpoicon“EIZO”)ediDistributoriautorizzatidaEIZO(a cuisifaràriferimentodaquiinpoicon“Distributori”)garantiscono,secondoiterminidiquestagaranzialimitata(acuisi faràriferimentodaquiinpoicon“Garanzia”)all’acquirenteoriginale(acuisifaràriferimentodaquiinpoicon“Acquirente originale”) che ha acquistato il prodotto specificato in questo documento (a cui si farà riferimento da
BEGRÄNSAD GARANTI EIZO NANAO CORPORATION (nedan kallat “EIZO”) och EIZOs auktoriserade distributörer (nedan kallade “Distributörer”) garanterar i enlighet med villkoren i denna begränsade garanti (nedan kallad “Garantin”) den ursprungligeköparen(nedankalladden“Ursprunglige köparen”)somköptedenidokumentetspecificeradeprodukten (nedankallad“Produkten”)frånEIZOellerDistributörer,attEIZOellerDistributörerenligtegetgottfinnandekostnadsfritt antingenreparer
ΠΕΡΙΟΡΙΣΜΕΝΗ ΕΓΓΥΗΣΗ ΗEIZONANAOCORPORATION(στοεξής«EIZO»)καιοιδιανομείςπουεξουσιοδοτείηEIZO(στοεξής«Διανομείς») παρέχουν εγγύηση, υποκείμενη και σύμφωνα με τους όρους της παρούσας περιορισμένης εγγύησης (στο εξής «Εγγύηση»),στοναρχικόαγοραστή(στοεξής«Αρχικός Αγοραστής»)οοποίοςαγόρασετοπροϊόνπουκαθορίζεταιστο παρόνέγγραφο(στοεξής«Προϊόν»)απότηνEIZOήτουςΔιανομείς,ηοποίαεξασφαλίζειότιηEIZOκαιοιΔιανομείς, σύμφωναμετηδιακριτήευχέρειάτους,είτε
ОГРАНИЧЕННАЯ ГАРАНТИЯ EIZO NANAO CORPORATION (называемая в дальнейшем “EIZO”) и авторизированные EIZO дистрибуторы (называемые в дальнейшем “Дистрибуторы”) гарантируют, в соответствии с условиями и пунктами этой ограниченной гарантии (называемой в дальнейшем “Гарантия”), первичному покупателю (называемому в дальнейшем“Первоначальный покупатель”),которыйприобрелуEIZOилиДистрибуторовпродукт,указанный в этом документе (называемый в дальнейшем “Продукт”), что E
有限责任保证书 EIZONANAO 有限公司（以下简称 EIZO ）和 EIZO 授权的经销商（以下简称 经销商 ），接受并依照本有限责任保证书 （以下简称 保证书 ）之条款，向从 EIZO 和经销商购买本文中所规定产品（以下简称 产品 ）的原买方（以下称 原买方 ） 提供保证 ：在保证期内（规定如下），如果原买方发现按本产品所附使用说明书（以下简称 用户手册 ）所述方式正常使 用本产品过程中，本产品出现故障或损坏，EIZO 和经销商根据其独自的判断免费修理或更换该产品。 本保证期限定为（i）自本产品购买之日起的五（5）年期间或限定为到达（ii）使用本产品 3 万小时的期限（以下简称 保证期限 ） 。 EIZO和经销商将不向原买方或任何第三方承担本保证书所规定之外的与本产品有关的任何责任或义务。 本产品的任何部件停产七 (7) 年后，EIZO 和经销商将不再保留或保管任何这类部件。维修显示器时，EIZO 与经销商将使 用符合我方质量控制标准的替换零件。 本保证书仅对于设有经销商的国家或地区有效。本保证书并不限定原买方的任何法律权利。 无论本保证书的任何其他条款如何规定，对于任何下列情况之一，EIZO 和
China Measures for RoHS Compliance in ChinaRoHS 关于电子信息产品污染控制标识 本标识根据「电子信息产品污染控制管理办法」，适用于在中华人民共和国销售的电子信息产品。标识中央的 数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项，在自制造日起算的年限内，不会 产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。 • 有毒有害物质或元素的名称及含量 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 （Pb） （Hg） （Cd） （Cr（VI）） （PBB） （PBDE） 印刷电路板 × ○ ○ ○ ○ ○ 机箱 ○ ○ ○ ○ ○ ○ 液晶显示器 × ○ ○ ○ ○ ○ 其他 × ○ ○ ○ ○ ○ ○ ：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 规定的限量要求以下。 × ：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 规定的限量要求。 ( 企业可在此处 , 根据实际情況对上表中打“×”的技术原因进行进一步说明 ) Appendix
Recycling Information Recycling Information This product, when disposed of, is supposed to be collected and recycled according to your country’s legislationtoreduceenvironmentalburden.Whenyoudisposeofthisproduct,pleasecontactadistributoror anaffiliateinyourcountry. ThecontactaddresseesarelistedontheEIZOwebsitebelow. http://www.eizo.com ForrecyclinginformationforcustomersinSwitzerland,pleaserefertothefollowingwebsite. http://www.swico.
Πληροφορίες ανακύκλωσης Τοπροϊόναυτό,όταναπορρίπτεται,πρέπεινασυλλέγεταικαιναανακυκλώνεταισύμφωναμετηνομοθεσία τηςχώραςσαςέτσιώστεναμηνεπιβαρύνειτοπεριβάλλον.Γιανααπορρίψετετοπροϊόν,επικοινωνήστεμε έναναντιπρόσωποήμιαθυγατρικήεταιρείαστηχώρασας. ΟιδιευθύνσειςεπικοινωνίαςαναγράφονταιστηντοποθεσίαwebτηςEIZOπαρακάτω. http://www.eizo.
Informace o recyklaci Při likvidaci produktu musí být produkt vyzvednut a recyklován podle zákonů příslušné země, aby nedocházelo k zatěžování životního prostředí. Zbavujete-li se produktu, kontaktujte distributora nebo pobočkuvesvézemi.KontaktníadresyjsouuvedenynanásledujícíwebovéstráncespolečnostiEIZO. http://www.eizo.com Ringlussevõtu alane teave Keskkonnakoormusevähendamisekstulekskasutatudtootedkokkukogudajavõttaringlussevastavaltteie riigiseadustele.
Информация относно рециклиране Приизхвърлянетонатозипродуктсепредлагасъбиранетоирециклиранетомусъобразнозаконитена вашатастраназадасенамализамърсяванетонаоколнатасреда.Когатоискатедасеосвободитеот тозипродукт,молясвържетесестърговскиямупредставителилисъссъответнитеорганиотговарящи затовавъввашатастрана. ДаннитезавръзкаснассаописанинаследнияИнтернетсайтнаEIZO: http://www.eizo.
4th Edition-November, 2012 Copyright © 2012 EIZO NANAO CORPORATION All rights reserved.
