User`s manual

5. Preferences
45
5-3. Validation
Specify the number of color patches that is used for validation. Default setting is 32.
Simple: 32 colors
Detail: 145 colors
Default setting is "Detail".
When the box is checked, validation is
performed automatically after the monitor
adjustment. Default setting is OFF.
5-4. Measurement device
When the box is checked, the measurement
device selecting window appears during
ColorNavigator startup.
If the box is unchecked, this dialog is not
shown unless the measurement device
cannot be found.
Select the method to compensate the
measurement value.
Color Management (Recommended)
For accurate color management workflow.
Suitable for single monitor using.
Multiple Monitor Matching
For color matching among various monitors.
No compensation
For other company’s monitor validation tool.
The sensor measurement value is used as it
is.
Adobe RGB-compliant monitor may not
be measured correctly depending on your
sensor.