User`s manual

42
4. Using ColorNavigator in Multiple Monitor Environment
4. Using ColorNavigator in Multiple Monitor Environment
If you use ColorNavigator in a multiple monitor environment, select a monitor to run the software after
starting up ColorNavigator.
Note
• If your OS is Windows Vista, the following settings are required in a multiple monitor environment.
1.Select [Control Panel] - [Appearance and Personalization] - [Personalization] -
[Adjust screen resolution].
2.[Display Settings] dialog appears.
3.Check the [Extend the desktop onto this monitor] check box for all monitors.
Startup ColorNavigator in Multiple Monitor Environment
1
Select a monitor
The software shows the following window after starting ColorNavigator.
Move the software window to the screen of the monitor you want to adjust and go on to the next
step.
2
Select a function
Select a function on the startup window. The process for each function is the same as that in a
single monitor environment.
3
Run ColorNavigator on the second monitor
When calibration is completed, a completion message will appear.
Press [Return to the start up window] and repeat the process for the second monitor.