User`s manual

3. Advanced Settings (Validation, Manual Adjusment)
39
4
Confirm the result
After validation, the number of the measured color batch, the color batch, the RGB values, the
measurement results, the calculated value derived from the profile, and the color difference (delta-E)
between the profile and the measurement results are shown on the result window.
Save the validation results
and generates a monitor
profile.
Select the color
coordinates to display the
results.
Select the method of
calculation.
Display the delta-E graph.
5
Save a profile
Click [Save] and then the message "The measurement result is saved." is displayed. Click [Quit].
The validation is completed.