User`s manual

38
3. Advanced Settings (Validation, Manual Adjusment)
3. Advanced Settings (Validation, Manual Adjustment)
3-1. Monitor Validation
Verifies the adjustment status and adjustment target (profile) of the monitor.
1
Select a target and click [Detail...] in the startup window
Tips
• When you select "Start validation after calibration has completed.", validation is automatically
performed after adjusting monitor. Refer to "5-3. Validation (p. 45)"
• Validation can be performed in the adjustment result window.
2
Click [Start Validation...]
3
Initialize the measurement device
The initialization window of the measurement device will open. Click [Initialize]. Initialize the
measurement device according to the instructions.
Initialization takes a few seconds.