User`s manual

2. How to Adjust the Monitor
33
2-4. Procedure for Measuring Ambient Light
Note
• The following measurement devices enable ambient light measurement.
- X-Rite Eye-One Pro
- X-Rite Eye-One Display2
- X-Rite colormunki
Eye-One Pro/Eye-One Display2
1
Select "Ambient light" in the Make a new target window
2
Click [Measure the target...]
3
Initialize the measurement device
The initialization window of the measurement device will open. Click [Initialize]. Initialize the
measurement device according to the instructions.
Initialization takes a few seconds. The ambient light measurement window will open.
Note
• Be sure that light does not seep through to the sensor of the measurement device during
initialization. Precise adjustment results cannot be obtained if light is detected during the
initialization process.
4
Attach the ambient light head to the measurement device
About attaching, refer to the user's manual of the measurement device.