User`s manual

2. How to Adjust the Monitor
27
6
Set a target name
Click [OK].
7
Save a profile
The above window will appear. Click [Do adjust].
Tips
• Name the profile within 63 characters.
• Profile name cannot contain any of the following characters:
Windows: \ / : * ? " < > |
Mac: / :
The name beginning with "."
• Generating a profile allows ColorNavigator to switch the monitor color settings based on the
adjustment result (Select an adjustment result from the list, and click [Apply] in the startup
window).
Note
• The suitable modes for the display image are available on the monitor (fine contrast mode).
When you perform the monitor adjustment with ColorNavigator, the monitor automatically
switches to CAL mode/EMU mode (i.e. Calibration mode/Emulation mode). The monitor
adjustment result is only registered in CAL mode/EMU mode. (The result is not registered in
other modes.) Use CAL mode/EMU mode for the monitor.
• When you adjust 6 colors on CG18, CG19, CG21 monitors, the monitor adjustment result is
registered to the Custom mode.
• Once the monitor is adjusted by ColorNavigator, avoid adjusting the monitor image on no
purpose. If the monitor is adjusted again, the previous adjustment result will be lost.
• Do not select the color profile on your OS after saving the profile, or color management cannot
work properly.
8
Proceed "Auto Adjust" button (analog input only)
Follow the software instructions and click the monitor auto adjust button.