User`s manual

2. How to Adjust the Monitor

Setup ColorNavigator

Turn on both the monitor and the computer 30 minutes before monitor

adjustment (= warming up)

Disable the power managing function of them so they will not be in the power save mode.

Quit other applications before starting up the ColorNavigator. Disable the screen saver so that it

will not be activated during adjustment or measurement.

Note

• To obtain precise adjustment results, the monitor and computer must be sufﬁciently warmed-up.

Once the monitor goes into the power-save mode, it takes a while for the brightness and color

conditions to re-stabilize.

Set the display resolution and colors

Set the monitor color at 16.7 million (24 bit) or more.

It is recommended that the resolution is 1024 x 768 or higher.

How to Adjust a Monitor

Startup ColorNavigator

Macintosh

Double click "ColorNavigator" icon in "Application" - "Utilities".

Windows

Double click "Shortcut to ColorNavigator" icon on the desktop.

Note

• Do not disconnect USB cables of the monitor or measurement device while running

ColorNavigator. Doing so may result in system freeze or software malfunction.

Select a measurement device

Select the proper measurement device for using ColorNavigator then click [OK].

If "Show this dialog box when ColorNavigator starts up" box is unchecked, this dialog is not

shown unless the measurement device is cannot be found.