User`s manual

16
2. How to Adjust the Monitor
6
Proceed monitor adjustment
The measurement window appears on the screen.
When colormunki is connected to the computer, turn the rotary disk to monitor measurement
mode.
Tilt the LCD panel up slightly and attach the measurement device to the measurement window.
(Refer to the user’s manual of the measurement device)
Proceed with adjustment in accordance with the instruction on the message window.
ColorNavigator sequentially shows some patterns for adjusting the monitor. Monitor adjustment
takes approximately 3 minutes.
Note
• When you perform the monitor adjustment, the monitor automatically switches to CAL mode/
EMU mode (i.e. Calibration mode/Emulation mode). The monitor adjustment result is only
registered in CAL mode/EMU mode. (The result is not registered in other modes.)
• The figure displayed in this window, depends on the type of measurement device connected to
the computer.
colormunki