User`s manual

56
Chapter 8 Reference
Preset Timing
The following table shows factory preset analog signal timing.
Attention
• Display position may be deviated depending on the PC connected, which may require screen adjustment using Setting
menu.
• If a signal other than those listed in the table is input, adjust the screen using the Setting menu. However, screen display
may still be incorrect even after the adjustment.
• When interlace signals are used, the screen cannot be displayed correctly even after screen adjustment using the Setting
menu.
Resolution
Frequency Polarity
Dot clock:
MHz Horizontal:kHz Vertical: Hz Horizontal Vertical
640×480 25.18 31.47 59.94 Negative Negative
720×400 28.32 31.47 70.09 Negative Positive
800×600 40.00 37.88 60.32 Positive Positive
1024×768 65.00 48.36 60.00 Negative Negative
1280×960 108.00 60.00 60.00 Positive Positive
1280×1024 108.00 63.98 60.02 Positive Positive
1600×1200 162.00 75.00 60.00 Positive Positive
1680×1050 146.25 65.29 59.95 Negative Positive
1680×1050 119.00 64.67 59.88 Positive Negative
1920×1080 138.50 66.59 59.93 Positive Negative
1920×1200 154.00 74.04 59.95 Positive Negative