User Manual
39
Chapter 4 SelfCalibration
7. Choose “Gamma”, and press .
Setting Function
1.6-2.7 Set the gamma value.
Adobe®RGB Set the gamma curve dened by Adobe®RGB.
sRGB Set the gamma curve dened by sRGB.
EBU Set the gamma curve dened by EBU.
REC709 Set the gamma curve dened by REC709.
REC1886 Set the gamma curve dened by REC1886.
SMPTE-C Set the gamma curve dened by SMPTE-C.
DCI Set the gamma curve dened by DCI.
L* Set the perceptually uniform gamma curve dened by CIE1976.
Note
• The color gradation adjustment results are reected and automatically become “Fixed” when adjusted
with ColorNavigator 6.
Press
after completing the setting.
8. After completing all settings, press .
4-5. Executing SelfCalibration
SelfCalibration can be executed manually regardless of the schedule.
Procedure
1. Choose “SelfCalibration” from the Adjustment menu, and press
.
2. Choose “Execute” from “SelfCalibration”, and press
.
The built-in calibration sensor is activated, and SelfCalibration is executed.
Attention
• To execute SelfCalibration, it is necessary to set the calibration details. For more information,
see “4-4. Setting the calibration targets” (page 38).
• After selecting “Execute”, warming up (after the power to the monitor is switched on, leaving the monitor on
for a certain period of time until the display becomes stable) may be executed before the built-in calibration
sensor comes out.