User Manual

10
Chapter 1 Introduction
●
Rear
16
17
15
10 11 12 13 14
10. Main power switch Turns the main power on or off.
: On : Off
11. Power connector Connects the power cord.
12. Input signal connectors Left: DVI-D connector
Middle: HDMI connector
Right: DisplayPort connector
13. USB upstream port Connects to the USB cable when using software that requires a USB
connection, or when using the USB Hub function. (page 51)
14. USB downstream port Connects to a peripheral USB device.
15. Stand
*2
Used to adjust the height and angle of the monitor screen.
Attention
• Do not hold the sensor section on the front side of the monitor when
adjusting the height or angle.
16. Security lock slot Complies with Kensington’s MicroSaver security system.
17. Cable holder Covers the monitor cables.
*2 An optional arm (or an optional stand) can be attached by removing the stand section (see “1-4. Basic
Operations and Functions” (page 12)).