Installation Manual

EISTAKAO
Installation Method：
15W Fast Charging Wireless
Car Charger
Operating instruction
3.Insert the ball head to slot
4.Scrwe tightly
Dashboard Installation
1.Attcah holder to charger,
screw tightly
2.Secure dashboard
holder holder on clean
and flat surface
3.Use lever to clamp down
more securely
4.Use know to adjust the
angle and length
5.Connect to power and
start charging
6. Pull lever up and peal
off the base
Instructions For Use
1. When in use, connect the onboard wireless charging device
to the corresponding data cable.
2. Press the silver button in the lower-left corner of the panel,
the arms of the car charger open, start to work, put the phone
on the car charger, it will Clamp the phone, when charging the
red light, when fully charged, the light becomes blue.
3. The device has the functions of overvoltage protection, 3. The device has the functions of overvoltage protection,
over-temperature protection, magnetic field protection, short
circuit protection, and so on. If the device is abnormal, it will
stop working automatically.
Product information and After-sales service
Product Name: Car stand wireless charger( Intelligent
sensing) Power:15W,10W,7.5W,5W
Effective transmission distance : 0-10mm
Size: 120mmx67nimx46mm Charging Interface: Type C
Packing list: 1*wireless charging psd
1*section cup holder 1*Air vent clip 1*Type-C cable 1*user
manualmanual
We attach great importance to our customers, please
feel free to contact us if you encounter any problem
when using the product, we will give you a reply
within 24 hours.
Email address:
[e-mail]
5.Attach to car air vent
6.Adjust bottom claw to
position secuerly
Air Vent Installation
1.Unscrew nut from slto
2.Pass the nut through
the ball head