User`s manual

If the Turn-On mode is set to

“on” in this state, when

power is fed to the unit, it will

turn on in “ideal” mode (see

Chapter 3).

If the Turn-On mode is set to “off”,

when power is fed to the unit, it will

turn on in “off” mode.

This function is designed for use in the event that the

power supply is fed by a specifically designated switch. In this case, the

automatic activation mode must be programmed in order to automatically

turn on unit when the switch is activated.

These steps must be followed:

SOUND

iSelect

1. Supply power to the unit by turning on

the switch. The unit will flicker a couple

of times and turn off.

2. Turn on the unit using the remote control

(ON/OFF key).

3. With the unit turned on, keep the

ON/OFF key pressed down for 2 seconds.

SOUND

iSelect

Key Sequence Display

6. Selecting Turn-On Mode

AUTO x

2’’

CC-1152ENG-02