ENG USER’S MANUAL CC-1152ENG-02
1 Important Safety Instructions Table of Contents Before installing the unit, please read and follow the instructions provided in the Installation Manual included in this kit. Quick Reference Guide 2 Before operating the unit, please read and follow the instructions provided in this User´s Manual thoroughly and save it for future reference.
2 Quick Reference Guide Automatic FM station search sensitivity Delete all FM tuning pre-sets Store all FM stations detected FM/DAB memory pre-sets 2” Step forward and back for iPod® playing list.
3 1. Introduction KBSOUND ® iSelect is a sound device specially designed for quick and easy installation. It fits discreetly into the decor of your kitchen, bathroom or anywhere in your home. The KBSOUND ® iSelect Kit comprises: = Electronic module with built-in FM tuner and power supply. 41,5W + 1,5W stereo audio output. = Two 2.5” or two 5" loudspeakers. = Remote control with the following functions: 4Volume, bass, treble and balance control. 4'Forced Mono' function. 4FM and RDS information..
4 2. General Operating Notes 1.- None of the functions (except ON/OFF) work unless the remote control is in “on” mode. 2.- Once the KBSOUND ® iSelect is connected to the mains, it will remain powered even it is in OFF state. That means that the OFF state (as indicated in this manual) really means a “standby” state. beep 3.- A short BEEP sound signal indicates that the data has been received 5m 4.
5 3. Operating Audio Functions Key Sequence If the electronic module is off, a brief press on the ON/OFF key will turn on the unit . The LED will display the word “ON” When the electronic module is off, the LED will be OFF. Display on vol 58 Increase/decrease in the volume level: The LED will flash to indicate the desired change in volume. Increase/decrease in bass/treble levels: The LED will flash to indicate the desired change in the bass/treble levels.
6 4. Operating the FM Tuner Key Sequence Display 4.1 Station Scan SCAN While the search is taking place, the word “SCAN” will appear on the display screen. The screen will duly display the station frequency of the next station found. 1” 102.50 FM 4.2 Direct Key-in of Station Frequency To directly key-in an FM station frequency, sequentially dial the numeric keys of the station frequency then press the FM key. For example, to select 94.7, press 9 4 7 FM.
7 Key Sequence Display 4.3 Tuning to FM Memory Pre-Sets MEM 19 The UP/DOWN keys allow you to scroll through the stations stored in the memory (see Chapters 4.4 and 4.5, Storing and Clearing Stations in Memory). When stations are stored in the memory they are sorted in ascending order; that is, beginning with 87.5 and ending with 108.0. 102.50 FM The screen will display the frequency of the station stored in that memory pre-set. 4.4 Storing and Clearing Station Frequencies Manually 94.
8 4.5 Storing and Clearing Station Frequencies Automatically To activate the storing station frequencies automatically process, hold down key 6 for 6 seconds. Key Sequence 6’’ Display AUTO When the automatic programming begins the screen will display the word “AUTO”. The electronic module will store into the memory the stations that are received with the best reception, sequentially from lowest frequency (87.5 MHz) to highest frequency (108.0 MHz).
9 5. Operating the Wireless KBSOUND ® DOCK Accessory The wireless KBSOUND ® DOCK Accessory for use with the KBSOUND ® iSelect 2,5" or 5" allows you to enjoy and listen to your music from all models of iPhone and iPod, and any other external sound source that can be connected to the Dock using a 3,5mm jack input. When the Dock is powered from the external power supply, it recharges the iPod/iPhone. IMPORTANT: use only the power supply supplied with the KBSOUND ® DOCK.
10 6. Selecting Turn-On Mode This function is designed for use in the event that the KBSOUND ® iSelect power supply is fed by a specifically designated switch. In this case, the automatic activation mode must be programmed in order to automatically turn on KBSOUND ® iSelect unit when the switch is activated. These steps must be followed: 1. Supply power to the KBSOUND ® iSelect unit by turning on the switch. The KBSOUND ® iSelect unit will flicker a couple of times and turn off. 2.
Electrónica Integral de Sonido S.A. is not responsible for any error or omissions that may appear in this manual, and reserves the right to make changes without prior notice. iPod and iPhone is trademark of Apple Inc. registered in teh U.S. and other countries. "Made for iPod" and "Made for iPhone" means that an electronic accessory has been designed to connect specifically to iPod and iPhone and has been certified by Electrónica Integral de Sonido S.A. to meet Apple performance standards.
