User`s manual

CC-1157ENG-02
7.2.- Pairing (linking) a new Bluetooth device
Before being able to stream music from
®
a Bluetooth device to our KBSOUND
kits it is necessary to link the
®
Bluetooth accessory. This operation
must be carried out only once with each
device.
Make sure that during the entire
operation there is only one Bluetooth
device within the range of coverage of
® ®
the KBSOUND Bluetooth option.
The Remote Control must be
pointing directly at the IR receiver of the
® ®
KBSOUND Bluetooth option.
Select the Bluetooth key option.
Press the 5 key on the Remote Control
for aproximately 10 seconds. “Link” will
appear in the display.
The IR led will flash in blue, and will
remain in this state until the linking
operation is completed, or a maximum
of 3 minutes.
Key
Sequence
Display
Access the Bluetooth menu of your
device
In the device select the KBsoundXX
(00,01,02...) option.
Check that the code indicated on the
device matches the code displayed
on the Remote Control.
Note: To get this code the Remote
Control must be pointing directly at
the IR receiver.
The linking process will be carried
out successfully when the IR blue led
stops flashing and “connected”
appears in the display of the
Bluetooth device.
Some Bluetooth devices may
optionally request a password to
confirm the link.
In such cases, dial 0000.
iPOD
BT
6”
DISCONNECT
LINK
048233
DAB
iPOD
AUDIO IN
DAB
iPOD
AUDIO IN
12