User`s manual

Key Sequence Display
To activate the storing station frequencies automatically process, hold down key 6 for 6
seconds. When the automatic programming begins the screen will display the word “AUTO”.
The electronic module will store into the memory the stations that are received with the best
reception, sequentially from lowest frequency (87.5 MHz) to highest frequency (108.0 MHz).
The system will use all the memory slots available, reaching a maximum of 30.
The process can take a few moments. Once the scan has been completed or once the
maximum number of memory slots has been used, the process ends and a BEEP signal
sounds.
To activate the clearing station frequencies automatically process for all the memory slots,
hold down key 4 for 6 seconds.
5.6. Storing and Clearing FM Station Frequencies Automatically
5.7. Adjusting FM Station Search Sensitivity
DEL ALL
AUTO
beep
6’’
6’’
To delete a station from the memory, select the station and hold down the 7 key for 2
seconds. The station will be deleted from the memory.
DEL MEM
2’’
11
SENS 1
FM SENS 1-2-3FM SENS 1-2-3
2’’
2’’
FM SENS 1-2-3
SENS 2
To adjust the automatic station search sensitivity (see 5.1), select a value
between 1 (minimum) and 2 (maximum) and press key FM SEN for 2
seconds
CC-1157ENG-02