USER’S MANUAL SPACE CC-1157ENG-02
1 Important safety instructions Table of contents Before installing the unit, please read and follow the instructions provided in the Installation Manual included in this kit. Quick reference guide 2 Before operating the unit, please read and follow the instructions provided in this User´s Manual thoroughly and save it for future reference. 1. Introduction 3 2. General operating notes 5 3. Operating audio functions 6 4. Operating the DAB tuner 7 5.
2 Quick reference guide Automatic FM station search sensitivity Delete all FM/DAB tuning pre-sets FM SENS 1-2-3 2” FM/DAB memory pre-sets 1” FM/DAB station scan 6” Step forward and back for iPod® playing list.
3 1. Introduction KBSOUND ® iSelect DAB is a sound device specially designed for quick and easy installation. It fits discreetly into the decor of your kitchen, bathroom or anywhere in your home. The KBSOUND ® iSelect DAB Kit comprises: = Electronic module with built-in FM and DAB+ tuner and power supply. 41,5W + 1,5W stereo audio output. = Two 2.5” or two 5" loudspeakers. = Remote control with the following functions: 4Volume, bass, treble and balance control. 4'Forced Mono' function.
4 KBSOUND ® SPACE DAB is a sound device specially designed for quick and easy installation. Is our new custom made audio solution. It´s open ended allowing you to choose your loudspeakers and amplifiers tu fulfill the specific design requirements of your dream project with superb sound.
5 2. General operating notes 1.- None of the functions (except ON/OFF) work unless the remote control is in “on” mode. 2.- Once the KBSOUND ® iSelect DAB is connected to the mains, it will remain powered even it is in OFF state. That means that the OFF state (as indicated in this manual) really means a “standby” state. beep 3.- A short BEEP sound signal indicates that the data has been received 5m 4.
6 3. Operating audio functions Key Sequence Display on If the electronic module is off, a brief press on the ON/OFF key will turn on the unit. The LED will display the word “ON” When the electronic module is off, the LED will be OFF. vol 58 Increase/decrease in the volume level: The LED will flash to indicate the desired change in volume. BAS+06 Increase/decrease in bass/treble levels: The LED will flash to indicate the desired change in the bass/treble levels.
7 4. Operating the DAB tuner 4.1. Getting started with DAB Key Sequence The first time the DAB option is selected as a sound source, the unit does not have any service available. DAB Press the up/down key and the unit automatically creates a list of receivable broadcasts. Take care as this operation may take some time. The display may turn off to save battery usage. The operation only finishes when you hear the beep signal. 1” Display Display dab services NOT found Searching dab stations beep 4.2.
8 4.4. Tuning to DAB memory pre-sets Key Sequence MEM 19 The up/down key allows you to scroll through the stations stored in the memory (see chapter 4.3). The DAB stations are stored in the memory in the same order they have been stored manually PLANET ROCK 4.5. Direct key-in of DAB station memory To directly key-in a DAB station memory, dial the numeric keys of the memory and then press the DAB key. For example, to select memory 19, press 1 9 DAB (see chapter 4.3). MEM 19 DAB 4.6.
9 5. Operating the FM Tuner Key Sequence 5.1 FM Station Scan manually SCAN While the search is taking place, the word “SCAN” will appear on the display screen. The screen will duly display the station frequency of the next station found. Display 1” 102.50 FM 5.2 Direct Key-in of FM Station Frequency To directly key-in an FM station frequency, sequentially dial the numeric keys of the station frequency then press the FM key. For example, to select 94.7, press 9 4 7 FM.
10 Key Sequence 5.3. Tuning to FM Memory Pre-Sets The SCAN keys allow you to scroll through the stations stored in the memory (see Chapters 5.5 and 5.6, Storing and Clearing Stations in Memory). Display MEM 19 When stations are stored in the memory they are sorted in ascending order; that is, beginning with 87.5 and ending with 108.0. 102.50 The screen will display the frequency of the station stored in that memory pre-set. FM 5.4.
11 Key Sequence To delete a station from the memory, select the station and hold down the 7 key for 2 seconds. The station will be deleted from the memory. Display DEL MEM 2’’ 5.6. Storing and Clearing FM Station Frequencies Automatically To activate the storing station frequencies automatically process, hold down key 6 for 6 seconds. When the automatic programming begins the screen will display the word “AUTO”.
12 9 6. Operating the Wireless KBSOUND ® DOCK Accessory The wireless KBSOUND ® DOCK Accessory for use with the KBSOUND ® iSelect DAB 2,5" or 5" allows you to enjoy and listen to your music from all models of iPhone and iPod, and any other external sound source that can be connected to the Dock using a 3,5mm jack input. When the Dock is powered from the external power supply, it recharges the iPod/iPhone. IMPORTANT: use only the power supply supplied with the KBSOUND ® DOCK.
11 7. Operating the KBSOUND ® Bluetooth® wireless accessory Features available ONLY when the KBSOUND ® Bluetooth® accessory is connected The KBSOUND ® Bluetooth® wireless accessory allows you to listen to the music stored in any device that has the ability to transmit via Bluetooth through the KBSOUND ® iSelect 2.5", KBSOUND ® iSelect 5" or KBSOUND ® SPACE kits. (KBSOUND ® Bluetooth option).
12 7.2.- Pairing (linking) a new Bluetooth device Access the Bluetooth menu of your device Before being able to stream music from a Bluetooth device to our KBSOUND ® kits it is necessary to link the Bluetooth® accessory. This operation must be carried out only once with each device. In the device select the KBsoundXX (00,01,02...) option. iPOD The Remote Control must be pointing directly at the IR receiver of the KBSOUND ® Bluetooth® option.
13 7.3.- Transmit audio to a KBSOUND ® Bluetooth® option from multiple Bluetooth devices Several Bluetooth devices can share the same KBSOUND ® Bluetooth® option, although only one can transmit audio at any time. To make this possible, it is necessary to have made the link of all Bluetooth devices with the KBSOUND ® Bluetooth® option (see chapter 6.2) 6” Activate the Bluetooth of the new device you wish to connect with and then select the KBSOUND ® Bluetooth® option with which you wish to link (e.g.
14 7.4.- Transmit audio from one device to several KBSOUND ® Bluetooth®options If there are several KBSOUND ® Bluetooth® options in your installation, you will be able to transmit your music to any of them interchangeably from the same Bluetooth mobile device. Please note that only one KBSOUND ® Bluetooth® option can receive the audio signal at any time. To make this possible, it is necessary to have made the numeric identification of each KBSOUND ® Bluetooth® option. (see chapter 6.1).
13 9 8. Selecting Turn-On Mode This function is designed for use in the event that the KBSOUND ® iSelect DAB power supply is fed by a specifically designated switch. In this case, the automatic activation mode must be programmed in order to automatically turn on KBSOUND ® iSelect DAB unit when the switch is activated. These steps must be followed: 1. Supply power to the KBSOUND ® iSelect DAB unit by turning on the switch. The KBSOUND ® iSelect DAB unit will flicker a couple of times and turn off. 2.
16 9. Technical specifications 52391/92 , 52398/93 Measurements Voltage Consumption demand Output signal (16 ohms) Passband Aux.
Electrónica Integral de Sonido S.A. is not responsible for any error or omissions that may appear in this manual, and reserves the right to make changes without prior notice. iPod and iPhone is trademark of Apple Inc. registered in teh U.S. and other countries. "Made for iPod" and "Made for iPhone" means that an electronic accessory has been designed to connect specifically to iPod and iPhone and has been certified by Electrónica Integral de Sonido S.A. to meet Apple performance standards.
