Installation Guide

STEP 8
STEP 9
STEP 10
Finish your installation by attaching any hoses and/or handles that might be included. There is a bag of extra
materials included in the packaging. There may be items that are not used at the time of installation but may be
needed later. Do not discard these materials.
TIP: If your faucet features a hand shower attachment, screw the tapered end of the hose onto the hand shower
so that the piece fits properly in the cradle.
Tighten the set screw located on the side of the faucet with your allen wrench to secure the spout in place.
When the faucet is installed turn on the water supply, check to make sure that all connections are tight (no water
should be leaking) and that the hot and cold supplies are working correctly, If you have a hand shower, divert the
water to the hose and allow the water to flow trhough the hose for approximately 5 minutes.