Installation Guide

STEP 1

STEP 2

STEP 3

Lay the faucet down ﬂat so that all parts can be easily viewed and accessed during assembly.

Slide the decorative escutcheon, or base, onto the body of the faucet. You may need to remove the mounting plate

if already in place.

TIP: Make sure the rubber sealing gasket (if included) is around the rim of the escutcheon. Shift the escutcheon

up the faucet so that you have enough room for your tools during installation.

Attach the mounting bracket to the body of the faucet. If a hex nut was included with your faucet, screw the nut

onto the body of the faucet followed by the mounting plate. The two should ﬁt tightly together to create a seal.