Instructions
Table Of Contents
- Einfügen aus: "FM074342_04_de.pdf"
- 1 Allgemeine Angaben
- 1.1 Hersteller Metallwarenfabrik Gemmingen
- 1.2 Angaben zur Betriebsanleitung
- 2 Erläuterung der Symbole
- 2.1 Symbole in der Betriebsanleitung
- 2.2 Warnhinweise
- 2.3 Symbole am Gerät
- 3 Sicherheitshinweise
- 3.1 Aufbewahrung der Betriebsanleitung
- 3.2 Sichere Verwendung
- 3.3 Bestimmungsgemäße Verwendung
- 3.4 Umbauten und Änderungen
- 4 Funktion und Geräteaufbau
- 4.1 Funktion
- 4.2 Geräteaufbau
- 5 Technische Daten
- 6 Transport und Lagerung
- 6.1 Allgemeines
- 6.2 Batterien
- 7 Montage und Installation
- 7.1 Maßangaben / Befestigungsmaße
- 7.2 Montage / Demontage, Gebrauchslage
- 7.2.1 Montage Ladesessel
- 7.2.2 Montage Adapter in Fremdgeräteladesessel
- 7.2.3 Montage Gürtelhaken
- 8 Inbetriebnahme
- 9 Betrieb
- 9.1 Normalbetrieb
- 9.1.1 Funktion
- 9.1.2 Einschalten / Wechsel der Funktion
- 9.1.3 Ausschalten
- 9.1.4 Dimm-Modus
- 9.2 Notlichtbetrieb
- 9.2.1 Ein- und Ausschalten des Notlichtbetriebs
- 9.3 Ladebetrieb
- 9.3.1 Laden der Batterie
- 9.3.2 Ladeabschaltung bei Verwendung im KFZ
- 9.4 Test der Batteriekapazität
- 9.5 Anzeigen
- 9.6 Fehlerbeseitigung
- 9.6.1 Fehler LED-Spannung
- 10 Instandhaltung, Wartung, Reparatur
- 10.1 Instandhaltung und Wartung
- 10.1.1 Austausch Batterie
- 10.1.2 Reinigung
- 10.2 Reparatur
- 10.3 Rücksendung
- 11 Entsorgung
- 12 Zubehör und Ersatzteile
- 13 EG-Konformitätserklärung
- Einfügen aus: "FM074342_04_en.pdf"
- 1 General Information
- 1.1 Hersteller Metallwarenfabrik Gemmingen
- 1.2 Information regarding the operating instructions
- 2 Explanation of the symbols
- 2.1 Symbols in these operating instructions
- 2.2 Warning notes
- 2.3 Symbols on the device
- 3 Safety notes
- 3.1 Operating instructions storage
- 3.2 Safe use
- 3.3 Intended Use
- 3.4 Modifications and alterations
- 4 Function and device design
- 4.1 Function
- 4.2 Device design
- 5 Technical data
- 6 Transport and storage
- 6.1 General
- 6.2 Batteries
- 7 Mounting and installation
- 7.1 Dimensions / fastening dimensions
- 7.2 Mounting / dismounting, operating position
- 7.2.1 Charging Unit Assembly
- 7.2.2 Assembly of the adapter in third-party charging units
- 7.2.3 Assembly of the belt hook
- 8 Commissioning
- 9 Operation
- 9.1 Normal Operation
- 9.1.1 Function
- 9.1.2 Switching On / Changing the Function
- 9.1.3 Switching off
- 9.1.4 Dimming mode
- 9.2 Emergency light operation
- 9.2.1 Switching the emergency light mode on and off
- 9.3 Charging Operation
- 9.3.1 Battery charging
- 9.3.2 Charging switch-off when used in a motor vehicle.
- 9.4 Battery capacity test
- 9.5 Indications
- 9.6 Troubleshooting
- 9.6.1 LED voltage errors
- 10 Maintenance and repair
- 10.1 Maintenance
- 10.1.1 Battery replacement
- 10.1.2 Cleaning
- 10.2 Repair
- 10.3 Returning the device
- 11 Disposal
- 12 Accessories and Spare parts
- 13 EC Declaration of Conformity
FM074342
2015-10-09·BA00·III·en·04
Technical data
7
Portable Lamp
HSE 7 LED / LS 7 LED
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency light
duration
Deep discharge
protection
At a residual capacity of the battery of < 10 %, the main light is automatically
switched to the secondary light.
Test function
Lamp control When the main light is defective, the light is switched automatically to the
secondary light
Battery capacity Determination of the current battery capacity
Mechanical data
Degree of protection IP66 (IEC/EN 60529)
Enclosure material Polyamide, impact-strength
Head tilting toward the front: 100°, toward the back: 90°
Pushbutton main light ON - secondary light ON - main light FLASHING OFF
Charge state display The LEDs indicate the available capacity for approx. 5 seconds
Ambient conditions
Ambient temperature -20 ... +50 °C
Storage temperature -20 ... +50 °C
Charging unit
Version charging unit LS 7 LED (for explosion-protected portable lamps)
supply voltage: 110 ... 240 V AC, 50 / 60 Hz and 12 ... 30 V DC
with emergency lighting function and automatic break device for motor vehicle
operation
with power supply cable for 110 ... 240 V AC, 50 / 60 Hz
Optionally, a charging cable for motor vehicle operation for 12 ... 30 V DC is
available.
Charging current
Charging time approx. 11 h
Function Charging starts upon inserting the portable lamp into the charging unit - with
voltage display via green LED
Automatic break
device
In motor vehicle operation, the car battery voltage is monitored. If the voltage
of the car battery drops below 11.7 V and 23.5 V with a 12 V and 24 V battery,
respectively, the charging process of the portable lamp will be interrupted
automatically.
The automatic break device can be deactivated.
Protection class II (with protective insulation)
Technical Data
main light: continuous duty:
flashing mode:
continuously on, typical 7 h
flashing up to 18 h
secondary
light:
continuous duty: continuously on, typical 32 h
at room temperature:
charging process stand by
12 V DC
24 V DC
110 V AC
240 V AC
max. 170 mA
max. 120 mA
max. 90 mA
max. 60 mA
power consumption < 1 W