User manual

1 Handset location
2 Handset(s) Search / Pairing key
• Long press: pairing of handsets
• Short press: paging of handsets
The Handset
Getting Started
Connecting the base
Before making connections, please see the safety
instructions at the start of the booklet.
Step 1 Turn the base over.
Step 2 Take the telephone connection cord, click it into its
socket and connect the other end of the cord to the
telephone socket.
Step 3 Take the mains power supply. Connect the jack plug
(3) of the power supply underneath the base and
connect the power supply to the mains.
Step 4 Pass the cords through the cord grips provided.
To charge your phone, place the handset on the base, making
sure that the base is connected to an power socket.
For optimal battery charge, please leave the handset in the
base uninterrupted for minimum 8-12 hours. It is best to leave
your eircom handset to charge overnight. During charging,
batteries may heat up. This is safe and will keep the battery
fully charged.
Only use certified rechargeable batteries. Non-rechargeable
batteries could damage your handset.
Power save mode (environmentally friendly):
Power save mode is a default setting which extends battery
charge for a longer time. If no key is pressed for 20 seconds,
the backlight of the handset screen will turn off automatically
to save charge. To get the display back, press any key on the
handset.
Charging the handset
Handset set-up
Step 1 Take the batteries provided in
the packaging.
Step 2 Turn over your handset and
press the top of the hatch to
release it.
Step 3 Insert the batteries one by one
according to their polarities.
Step 4 Fit the hatch to the handset
by pushing it up until it is
completely closed.
Step 5 The screen turns on. Place your handset on its base
and fully charge the batteries.
Step 6 A beep sounds when you place the handset on the
base.
The battery charging icon
moves to inform you that
charging is in progress. The icon display stops moving when
the batteries are charged.
Switching the handset on / off
To switch on the handset, give a long press on the key .
To switch off the handset, give a long press on the key
.
The message Switch off HS? is displayed.
Press the key to confirm.
Indicator light - incoming call
Loudspeaker
Graphic screen
Upper and lower side keys :
• To Increase / Decrease the volume
• Browsing through the menus
Phonebook access key
Menu access / validation key
Mute button: cuts off the microphone
“Hang up” button
• Short press: return to main menu
• Long press: switch handset on / off
Alphanumeric keypad
“Hash” key
• Long press : (un)lock the keypad
Microphone
Side key : (de)activate the amplifier
Cancel / Intercom / Delete character key
R key (flashing, to manage several calls)
Browsing through the menus /
Upper and lower keys:
• To increase / Decrease the volume
• Browsing through the menus
• : See the list of calls received
• : See the list of outgoing calls
“Open line” key
• During a call: to (de)activate the hands-free
mode
“Star” key
• Long press: to (de)activate the silent mode
Charging terminals
1
3
4
2
The base
1
2
Welcome to eircom
This guide introduces some of the key features of your new handset.
You can view a full user manual at http://www.eircom.net/phoneguides
Your eircom 9000B pack contains:
• 1 eircom 9000B handset
• 1 eircom 9000B base
• 2 rechargeable batteries
• 1 telephone connection cord
• 1 mains power supply with connection cord
• 1 belt clip
• 1 quick start guide
EIR-RRD1664 eircom 9000B QSG_V3.indd 6-8 1/10/13 11:13 AM