User guide

35
The base
You enable the pairing mode when you associate an additional handset, for example.
Give a long press on the key on the base.
1 Ente
r the current code and validate with .
2 Enter the new code and validate with .
3 Re-enter the new code to confirm and validate with .
When you reset your base, all the settings are returned
to their initial values (factory settings),
except for the phonebook.
Follow the instructions on the screen and confirm.
Enabling the pairing mode
(long press)
Changing the default code
> Settings > Base settings > System PIN
Resetting the base
> Settings > Base settings > Base reset
Your base will remain in pairing mode for about 1 minute.