User guide

31
Managing your messages
When playing back messages, press the following buttons:
TO... FROM THE BASE FROM THE HANDSET
Go on to the next message 1 press
Return to the start of the
message
1 press
Return to the previous message 2 presses
Pause/Resume reading 1 press
Stop/Start message again 1 short press
Delete the message being read 1 long press 1 press
Querying your answering machine remotely
This function allows you to check your messages from outside.
When playing back messages, press the following buttons:
1 Dial your phone number, the telephone rings (see “Changing the number of
rings”, page 33.).
2 While listening to your announcement , press the key and enter your remote
querying code.
TO... OTHER TELEPHONE
Read messages 1 press 5
Enable / Disable the answering/recording machine 1 press 9
Go on to the next message 1 press #
Return to the start of the message 1 press *
Return to the previous message 2 presses *
Delete the message being read 1 press 3
Pause/Continue playing back 1 press 0
Notes If the answering machine is is disabled, wait for 12 rings before the
bip is emitted. Press the key and enter your remote querying
code.
Notes The default code is 0000. You can change it.
For further details, refer to paragraph “Changing the remote querying
code”, page 33.