User guide

3
Installing the telephone
Connect the telephone cable
• Under the base, click the end of the spiral telephone cable into its housing (2).
• Click the end of the telephone line cable into its housing (1) and connect the other
end to the pho
ne line.
Wall-mounting your telephone
• Swivel the grip clip. This prevents the handset from falling off its base.
• Mark the wall at the two fixture points.
• Drill the wall at the marked points.
• Insert rawlplugs into the holes if necessary. Insert the screws into the rawlplugs.
• Fix the telephone to the wall, align the wall mounting slits with the screws in the
wall, then f
irmly push the telephone into position.
• Place the telephone so that it holds securely and without danger.
To fix your telephone to the wall, you will need two screws and two
rawlplugs. These are not provided in the pack.
(1). Telephone Line Cable Plug.
(2). Telephone Handset Plug.
Position 2
(Low volume).
Wall mounting slots.
Position 1
(High volume).
Ring tone volume setting
switch.