User guide

31
SETTINGS
ADVANCED SETTINGS /
HANDSET SETTINGS
Registering a new handset to a
base
To register a new handset to a base you
must:
• put the handset in registration mode,
• put the base in registration mode.
Once this is done, the registration (mutual
recognition of the base and the new handset)
will be done automatically (registration can
take a few seconds).
Take the handset to be registered:
On the navigator key , press  or 
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET. using  or .
Press Valid. .
Select SET HANDSET using  or . Press
Valid. .
Select REGISTRATION. Press Valid. .
Press Yes to put the handset in
registration mode.
The handset enters the registration mode.
If the code of the base has been
modified (different from 0000), the
registration will not be possible with
this procedure, refer to paragraph
Personal registering, page 32
On the base:
Put the base to which you want to link the
handset in registration mode and press the
base button for several seconds.
The base is in registration mode.
The new handset and the base are mutually
searching for each other. The registration
may take several seconds.
Once the handset is registered, the handset
automatically exits the registration mode and
lets you know the registration is done.
Modifying the base preference
This function enables you to specify which
base will be used by your handset to make
calls (if your handset is registered to several
bases).
On the navigator key , press  or 
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET. using  or .
Press Valid. .
Select SET HANDSET. Press Valid. .
Select BASE PRIORITY using  or .
Press Valid. .
You can also set your base to the
registration mode using a handset
already registered by selecting the
Registration function in the menu
SETTINGS/ADVENCED SET./SET
BASE.
LU Eircom 8010R_D66.book Page 31 Vendredi, 28. novembre 2008 10:05 10