User guide

21
ACCESSORIES
Modifying or deleting a birthday
alarm
In the birthday alarm list screen, select the
alarm you wish to edit using  or . Press
Option .
The following options are available:
- VIEW: to view the alarm data.
- EDIT: to change the alarm name or date.
- DELETE: to remove a birthday
or organiser alarm.
- RING TONE: to set the ring tone that will
sound when the alarm goes off.
- NEW ENTRY: to set up a new alarm.
To exit the menu, press the red key .
Monitoring a room
Two handsets must be registred on the same
base to use this function. You can use your
handset to monitor a room. This allows you,
for example, to monitor a baby's room.
To do so, place one of the handsets in the
room to be monitored. This unit will be in
"sender" mode.
The other handset will remain with you, it is in
"receiver" mode.
On the receiver handset:
On the navigator key , press  or 
until the ACCESSORIES screen is
displayed, press OK to confirm.
Select ROOM MONITOR. using  or .
Press Valid. .
Select the sender handset using  or .
Press Call .
The sender handset rings, pick up using the
green key .
On the transmitter handset:
A screen invites you to activate the monitor
mode (sender mode). Press Yes .
Both handsets are now in monitor mode.
• Place the sender handset in the room to
be monitored.
• Keep the receiver handset with you.
To stop monitoring:
-Press Stop on the transmitter set.
The receiver set will automatically return to
the standby screen.
-Press Stop on the receiver set and
confirm by pressing Yes and
Stop on the transmitter handset at
the same time.
The handset in sender mode does
not ring to notify you of incoming
calls. It can therefore be placed in a
room where someone is sleeping.
When in monitor mode, the receiver
handset can be used to make calls.
To make a call: press Call and
dial the number
To answer a call: press green
key .
At the end of the call, the handset
will automatically return in monitor
mode.
LU Eircom 8010R_D66.book Page 21 Vendredi, 28. novembre 2008 10:05 10