eircom 8010R Digital cordless telephone User Guide Irish Trade Mark Registration no. 213824 Registered office: eircom Limited, 1HSQ, St. John’s Road, Dublin 8 Registered in Ireland No. 98789 8010R.
LU Eircom 8010R_D66.book Page 2 Vendredi, 28. novembre 2008 10:05 10 INTRODUCTION Dear customer: Thank you for purchasing a eircom 8010R telephone; we appreciate your trust in us. This product was manufactured with the upmost care, should you encounter any difficulties during its use, we recommend that you refer to this user guide. For further information please refer to eircom 8010R helpdesk : 1850 60 20 60.
LU Eircom 8010R_D66.book Page I Vendredi, 28.
LU Eircom 8010R_D66.book Page II Vendredi, 28.
LU Eircom 8010R_D66.book Page 1 Vendredi, 28. novembre 2008 10:05 10 YOUR TELEPHONE Unpacking Place the box in front of you, open it and make sure it contains the following items: • one eircom 8010R base station, • one eircom 8010R handset, • one battery compartment cover, • one plug, • one telephone line cord, • three rechargeable batteries, • this user guide. Your base It fits well into your family environment. Handset location Base button Pressed briefly: - handset paging.
LU Eircom 8010R_D66.book Page 2 Vendredi, 28. novembre 2008 10:05 10 YOUR TELEPHONE Your handset With its user-friendly design, you will appreciate how easy it is to hold and its quality during conversations.
LU Eircom 8010R_D66.book Page 3 Vendredi, 28. novembre 2008 10:05 10 YOUR TELEPHONE The navigator key, a rapid selection tool. To confirm or to access a sub-menu Navigating To cancel, delete or go to the previous menu The visual display of your handset Battery indicator Number of handset Date 1 03/01 00:00 Sil. Alarm Time Name of programmed functions in and keys.
LU Eircom 8010R_D66.book Page 4 Vendredi, 28. novembre 2008 10:05 10 YOUR TELEPHONE Connecting the base Before making any connections, please refer to the safety instructions presented at the beginning of this user guide. Power socket On the back of the base, click in the telephone jack in its socket (as shown on the drawing) and connect the other end of the lead to the wall telephone socket.
LU Eircom 8010R_D66.book Page 5 Vendredi, 28. novembre 2008 10:05 10 YOUR TELEPHONE Handset turning on and off To turn off the handset, hold down the red key . The "POWER OFF" message is displayed on the screen. Your handset is now switched off. To turn on your handset, press the green key . Information is displayed on the screen, including the battery charging indicator icon, the handset number (for example 1), the date, the time and the function keys.
LU Eircom 8010R_D66.book Page 6 Vendredi, 28. novembre 2008 10:05 10 GETTING STARTED Making a call During a call Enter the number of your contact using the keypad keys. During If you enter an invalid digit, press C on the Select the desired option in the following list: - HANDSFREE: to activate the handset speaker. - INTERNAL CALL: to transfer the call to another handset. - SECOND CALL: to make a second call. - PHONEBOOK: to access the phonebook. - CALLS: to access the call log.
LU Eircom 8010R_D66.book Page 7 Vendredi, 28. novembre 2008 10:05 10 GETTING STARTED Call transfer Receiving a second call whilst on line This function is only accessible when two handsets or more are registered to the same base. You can now transfer the call in progress to another hand set. During the call, a beep is transmitted to your telephone by your service provider to let you know that you have a second call waiting. During communication, press Menu Press ACCEPT .
LU Eircom 8010R_D66.book Page 8 Vendredi, 28. novembre 2008 10:05 10 GETTING STARTED To end one of the calls and continue the other one Press Menu Accessing the phonebook or call log During a call, you can access your phonebook to look up a telephone number, a name contained in an entry or information on calls stored in your call log. . Select HANGING UP using or . Press Valid. . During a call, press Menu The call in progress is definitely terminated, and you can then take the second call.
LU Eircom 8010R_D66.book Page 9 Vendredi, 28. novembre 2008 10:05 10 GETTING STARTED Ending a call At the end of the conversation, press the red key . Communication between two handsets To call another handset, press the key. Select with the desired handset with the or keys. Press Call . The handset rings. Pick up on the second handset using the green key To end the call, press the red key . . You can also easily call another handset if you know its number.
LU Eircom 8010R_D66.book Page 10 Vendredi, 28. novembre 2008 10:05 10 MENU STRUCTURE You can navigate through the menus using the navigator key PHONEBOOK VIEW . CALLS INCOMING CALLS CALL OUTGOING CALLS EDIT EVENTS SEARCH Option RING TONE ADD NUMBER NEW ENTRY DELETE ACCESSORIES ALARM PERSONALIS. RING TONE TIMER EXTERNAL CALL BIRTHDAY INTERNAL CALL ROOM MONITOR.
LU Eircom 8010R_D66.book Page 11 Vendredi, 28. novembre 2008 10:05 10 MENU STRUCTURE SETTINGS PROGRAM KEYS DATE/TIME CONTRAST AUTO HANG UP AUTO PICKUP VOICE BOX No LANGUAGE ADVANCED SET. SET HANDSET REGISTRATION BASE PRIORITY RESET HANDSET PERSON. REGISTR SET BASE REGISTR.
LU Eircom 8010R_D66.book Page 12 Vendredi, 28. novembre 2008 10:05 10 YOUR PHONEBOOK YOUR PHONEBOOK You can store 100 phonebook entries in your phonebook. Each phonebook entry can contain the name of your contact which can be a maximum of 12 characters long (spaces included), your contact's telephone number up to 24 digits and an icon identifying the type of number (work, home, mobile or fax). You can associate a unique ring tone to each entry and thus create your own call groups.
LU Eircom 8010R_D66.book Page 13 Vendredi, 28. novembre 2008 10:05 10 YOUR PHONEBOOK Once the icon is selected, press Valid. special characters space, +, @, -, $, &, %, 0, / #,".:;!?’()_ To enter text press successively on the desired key until the letter is displayed on the screen. On the navigator key , press or until the PHONEBOOK screen is displayed, press OK to confirm. Select New. Press Valid. . A new entry is created. It appears in the phonebook list.
LU Eircom 8010R_D66.book Page 14 Vendredi, 28. novembre 2008 10:05 10 YOUR PHONEBOOK Once the first letter of the name is displayed, wait a moment. • To correct the name, press C on the navigator key to delete characters. The phonebook selects the first name in the list that starts with the selected letter. Make your corrections using the keypad keys by pressing successively on the corresponding keys.
LU Eircom 8010R_D66.book Page 15 Vendredi, 28. novembre 2008 10:05 10 YOUR PHONEBOOK To exit the menu, press the red key . Associate a ring tone to your contact You can associate different ring tones to each contact of the repertory and thus create your own groups of calls. On the navigator key , press or until the PHONEBOOK screen is displayed, press OK to confirm. Select the contact using , keys. Press Option . Select RING TONE using or . Press Valid. .
LU Eircom 8010R_D66.book Page 16 Vendredi, 28. novembre 2008 10:05 10 CALL LOG CALL LOG This menu enables you to view the call or event lists of your telephone. The dialled call log presents the calls you made. The received call log presents the calls you received. The event log groups together all the new events that took place in your absence: • calls received during your absence, • operator message service.
LU Eircom 8010R_D66.book Page 17 Vendredi, 28. novembre 2008 10:05 10 CALL LOG Viewing the events log If one or more new events occurred during your absence, the information screen "NEW EVENTS !" appears. • If you do not wish to view the event log at • To view the event log, press this time, press the red key . . Once the event log has been viewed, the information screen disappears. You can however view it again via the "CALLS" menu. A summary screen appears.
LU Eircom 8010R_D66.book Page 18 Vendredi, 28. novembre 2008 10:05 10 ACCESSORIES ACCESSORIES This menu offers you numerous additional functionalities: • Alarm clock: to use your handset as an alarm clock. • Timer: to remind you of an event (programmed to sound at the end of a few minutes or a few hours). • Birthday: the handset will ring at the set date and time to remind you of the name of the person to whom you would like to wish happy birthday. • Monitoring a room: use a handset to monitor a room.
LU Eircom 8010R_D66.book Page 19 Vendredi, 28. novembre 2008 10:05 10 ACCESSORIES Changing the alarm clock ring tone To modify the alarm clock ring tone, select RING TONE in the alarm clock menu using or . Press Valid. . Press or to increase or decrease the volume. Press Return until the ACCESSORIES screen displayed, press OK to confirm. Valid. to access the volume Once the volume is set, press Valid. , press or is Select TIMER using or . Press The list of ring tones appears.
LU Eircom 8010R_D66.book Page 20 Vendredi, 28. novembre 2008 10:05 10 ACCESSORIES Press Volume setting screen. to access the volume Press or to increase or decrease the volume. Once the volume is set, press Valid. . Press Return screen appears. , the timer activation Launch the timer by pressing Start Adding a new birthday alarm On the navigator key until the ACCESSORIES screen displayed, press OK to confirm. Valid. Valid.
LU Eircom 8010R_D66.book Page 21 Vendredi, 28. novembre 2008 10:05 10 ACCESSORIES Modifying or deleting a birthday alarm The sender handset rings, pick up using the green key In the birthday alarm list screen, select the alarm you wish to edit using or . Press Option . . On the transmitter handset: A screen invites you to activate the monitor The following options are available: - VIEW: to view the alarm data. - EDIT: to change the alarm name or date.
LU Eircom 8010R_D66.book Page 22 Vendredi, 28. novembre 2008 10:05 10 CUSTOMISING THE HANDSET CUSTOMISING THE To exit the menu, press the red key HANDSET .
LU Eircom 8010R_D66.book Page 23 Vendredi, 28. novembre 2008 10:05 10 CUSTOMISING THE HANDSET Activating/deactivating the silent mode The image is displayed on the screen. When in silent mode, the telephone ringer and keypad beeps are inhibited. On the navigator key , press or until the PERSONALIS. screen is displayed, press OK to confirm. Select RING TONE using or . Press Valid. Press Valid. , to keep this image as the background display or use the or keys to select a different one.
LU Eircom 8010R_D66.book Page 24 Vendredi, 28. novembre 2008 10:05 10 SECURITY SECURITY Programming an emergency number This menu enables you to change or customise the security parameters of your telephone. You can: • lock the keypad, • programme an emergency number, • modify the base code, • define the call time limit, • define forbidden prefixes, • authorise or deny communication to a number of handsets. This function allows you to define an emergency number which can be enabled or disabled.
LU Eircom 8010R_D66.book Page 25 Vendredi, 28. novembre 2008 10:05 10 SECURITY A list of various executable actions appears: - ACTIVATE: to activate the emergency number. - DEACTIVATE: to deactivate the emergency number. - CHANGE NO: to modify the emergency number. If the time limit ends during a telephone conversation, communication will not be cut off. Once you have hung up, it will not be possible to make a new call. Calls between handsets (internal calls) are not affected by the call time limit.
LU Eircom 8010R_D66.book Page 26 Vendredi, 28. novembre 2008 10:05 10 SECURITY Once the modifications have been made, the information screen shows the new call time limit. For creating or modifying a prefix Select an empty location (dashes) or a prefix to modify using or . Press Valid. To exit the menu, press the red key . The prefix input screen appears. Defining forbidden prefixes - Call barring You can prohibit the use of certain prefixes on your telephone.
LU Eircom 8010R_D66.book Page 27 Vendredi, 28. novembre 2008 10:05 10 SECURITY Modifying the base code Authorising listening in The base code (0000 being the default setting) is required to access certain security functions. It must be composed of 4 digits. The intrusion function authorises or prevents a second handset registered on the same base from joining in a current conversation. If the intrusion mode is active, it is then possible to join a conversation in progress using another handset.
LU Eircom 8010R_D66.book Page 28 Vendredi, 28. novembre 2008 10:05 10 SETTINGS SETTINGS This menu or customise parameters. enables you the handset If you programm the function "Number" to the two softkeys, each number will be programmed separatly. to change and base Programming a key This function enables you to programme the and keys on your handset giving you direct access to certain functions right from the idle screen.
LU Eircom 8010R_D66.book Page 29 Vendredi, 28. novembre 2008 10:05 10 SETTINGS Adjusting the contrast Select AUTO HANG UP (or AUTO PICKUP) using or . Press Valid. On the navigator key , press or until the SETTINGS screen is displayed, press OK to confirm. Select CONTRAST using or . Press Valid. . A screen displays the current status (on or off). • To change the status, press Edit • To keep the status, press Valid. . . To exit the menu, press the red key . .
LU Eircom 8010R_D66.book Page 30 Vendredi, 28. novembre 2008 10:05 10 SETTINGS The number of your voice messaging service is set in the factory. To change this number, proceed as follows: On the navigator key , press or until the SETTINGS screen is displayed, press OK to confirm. Modifying the language This function enables you to change the screen display language. On the navigator key , press or until the SETTINGS screen is displayed, press OK to confirm. Select VOICE BOX No using or .
LU Eircom 8010R_D66.book Page 31 Vendredi, 28. novembre 2008 10:05 10 SETTINGS ADVANCED SETTINGS / HANDSET SETTINGS On the base: Put the base to which you want to link the handset in registration mode and press the base button Registering a new handset to a base The base is in registration mode. To register a new handset to a base you must: • put the handset in registration mode, • put the base in registration mode.
LU Eircom 8010R_D66.book Page 32 Vendredi, 28. novembre 2008 10:05 10 SETTINGS An information screen presents the current base preference for your handset. • To keep the preference, press • Valid. . To modify Edit the preference, press . • Yes . If you do not wish to re-initialise your handset, press No A list provides the bases among which you can choose the preferred base to which you want your handset to be registered. With the automatic mode you are not required to specify the preference.
LU Eircom 8010R_D66.book Page 33 Vendredi, 28. novembre 2008 10:05 10 SETTINGS Enter the base code. Press Valid. . The handset enters the registration mode, "HANDSET IN REGISTR. MODE" is displayed on the screen. Put the base to which you want to register the handset in registration mode. Once the handset is registered, select the required handset number. Press Valid. .
LU Eircom 8010R_D66.book Page 34 Vendredi, 28. novembre 2008 10:05 10 SETTINGS Resetting the base De-registering a handset When you reset your base, all the base parameters are reset to their initial values (factory settings). This function enables you to de-register a handset from your base. This may be necessary if you have lost a handset or if you already have 6 handsets registered to the same base. On the navigator key , press or until the SETTINGS screen is displayed, press OK to confirm.
LU Eircom 8010R_D66.book Page 35 Vendredi, 28. novembre 2008 10:05 10 SETTINGS Renaming the base On the navigator key , press or ADVANCED SETTINGS / LINE SETTINGS until the SETTINGS screen is displayed, press OK to confirm. Before changing the settings of the telephone line, contact your operator to obtain the parameters for your line. Select ADVANCED SET. using or . Press Valid. . Select SET BASE. Press Valid. Modifying the network type . Select RENAME BASE using or . Press Valid. .
LU Eircom 8010R_D66.book Page 36 Vendredi, 28. novembre 2008 10:05 10 SETTINGS To exit the menu, press the red key Modifying the flash duration (R key) . Modifying the dialling mode Depending on the type of network your telephone is linked to, it uses tone or pulse dialling. This function enables you to configure your telephone according to the type of dialling used by your network. On the navigator key , press or until the SETTINGS screen is displayed, press OK to confirm. Select ADVANCED SET.
LU Eircom 8010R_D66.book Page 37 Vendredi, 28. novembre 2008 10:05 10 SETTINGS • To modify the duration, press Edit To exit the menu, press the red key . . Setting a PABX prefix If a private automatic branch exchange is used, you can programme the external call prefix. With this function you can set the: • PABX prefix number, • dialled number length at which point the PABX will be automatically dialled (this length is called "digit before prefix"), • prefix status (on or off).
LU Eircom 8010R_D66.book Page 38 Vendredi, 28. novembre 2008 10:05 10 APPENDIX Care and Maintenance Use a slightly damp cloth to wipe the base and handset, do not use a dry cloth as this may cause electrostatic charges. Problems Refer to the table presented below in case of an operational malfunction: Problems Remedies The handset displays "OUT OF RANGE". Make sure that : • the plug is properly connected to a power socket. • the power connector is properly plugged into the base.
LU Eircom 8010R_D66.book Page 39 Vendredi, 28.
LU Eircom 8010R_D66.book Page 40 Vendredi, 28. novembre 2008 10:05 10 ENVIRONMENTAL INFORMATION Environmental impact Electrical and Electronic appliances are an integral part of our daily lives.
LU Eircom 8010R_D66.book Page 41 Vendredi, 28. novembre 2008 10:05 10 WARRANTY a) The eircom 8010R has a warranty of 12 months and is guaranteed to be free from defects in materials and workmanship during that period. b) Should your eircom 8010R fail to function properly please call the helpdesk on 1850 60 20 60. c) The product must have been used for the intended purpose and must not have been subjected to wilful or accidental damage.
Note.fm Page 1 Jeudi, 27.
Note.fm Page 1 Jeudi, 4.
