User guide

Telephone answering machine setting
29
Display mode
This mode allows you to adjust the behaviour of your
base’s display.
Go to ANS. MACH / SETTINGS / DISPLAY MODE.
Press Edit .
Select the mode which meets your needs:
- COMFORT:
Simple answering machine with messages
: "o"
flashes on the display. A short press
*
on allows you to play back your
messages while keeping "o" displayed.
Recording answering machine with new messages
:
the number new messages is displayed on the
display. A short press
* on allows you to
play back your new messages.
Recording answering machine without new
messages: the display is initially off. A short press*
on displays "0" on the screen .
Two successive short presses
* on
allows you to play back your old messages. Once
the messages have been played back, the display
goes off again.
- OFF : irrespective of the state your answering
machine: simple, recorder (with or without
messages) or deactivated, the base display remains
off.
Simple answering machine
with messages: A short
press
* on allows you to read your new
messages.
Simple answering machine
without messages: a
beep is emitted by your base in response to a short
press
* on .
Recording answering machine with new messages:
a short press
* on allows you to play
back your new messages.
Recording answering machine without new
message: Two successive short presses* on
allows you to play back your old
messages.
- ECO :
Simple answering machine
with messages: A short
press
* on allows you to play back your
new messages.
Simple answering machine
without messages: a
beep is emitted by your base in response to a short
press
* on .
Recording answering machine with new messages
:
the display is initially off, and a short press
*
on displays the number of flashing
messages and then plays them back. Once the
messages have been played back, "o" is displayed
for 5 seconds and the display then goes off again.
Recording answering machine without new
messages : the display is initially off. For a short
press
* on , "0" is displayed for
5 seconds and the display unit is then switched off
again.
Two successive short presses
* on
allows you to play back your old messages. Once
the messages have been played back, the display
goes off again
Press Valid. .
* Make a distinction between long
presses and short presses:
When you press a key on your
eircom 8000A base, a beep is
emitted as soon as your short press
has been saved.
If you hold the key pressed, a
second beep is emitted after the first
one: the long press is thus
validated.
LU eircom 8000_8000A.book Page 29 Jeudi, 12. novembre 2009 12:01 12