User guide

Settings
24
The screen presents the new flash duration.
• To keep the duration, press Confirm .
• To modify the duration, press Edit .
Setting a PABX prefix
If a private automatic branch exchange is used, you
can programme the external call prefix.
With this function you can set the:
• PABX prefix number,
• dialled number length at which point the PABX
will be automatically dialled (this length is called
"digit before prefix")
• prefix status (on or off).
Go to SETTINGS / ADVANCED SET. / SET LINE /
PABX PREFIX.
Press or key.
Press Yes , to modify this setting.
Select the desired option:
- ACTIVATE / DEACTIVATE: to select a status.
- PREFIX: to enter the number giving you access to
the outside line.
- EDIT LENGTH: to specify the «digits before prefix».
- EXIT PABX: to exit the menu.
To modify the prefix, select PREFIX, press Valid. .
Enter the prefix using the keypad, press Valid. .
To modify the digits before prefix, select
EDIT LENGTH., press Valid. .
Enter the digits before prefix using the keypad, press
Valid. .
2nd call
This function allows you to activate or deactivate the
outgoing 2nd call option during communication. You
can only activate this, if you subscribe to the "2nd call"
and "Number display" services.
Go to SETTINGS / ADVANCED SET. / SET LINE /
2ND CALL.
A screen displays the current status.
• To change the status, press Edit .
The status is modified on the screen, press
Valid. .
• To keep the status, press Valid. .
LU eircom 8000_8000A.book Page 24 Jeudi, 12. novembre 2009 12:01 12