Installation Guide
PCIe x1 to 2-PORT GIGABIT
ETHERNET CARD (ER3013)
www.eiratek.com
1
Introduction:
EiRA PCIe Dual-port Gigabit Network Card provides two RJ45 port and support 10/100/1000M rate full
duplex, half-duplex adaptive. It supports gigabit super-long frame, maximum can provide two-way data
transfer rate of 1000M. Using it, you can implement gigabit network to the desktop to enhance network
performance. It is 100 times faster than, and yet 100% fully backward compatible with 10/100BASE-T
system, therefore, it can be easily plugged into almost any existing network.
Product Highlights:
• Complies with PCI-Express Revision 1.1
• PCI-Express 1-Lane (x1) interface
• Supports standard and low profile chassis
• A high performance 1000BASE-T Ethernet controller card
• Backward compatible to 10/100BASE-T networking
• Supports jumbo frame to 9K bytes
• 10/100/1000Mbps data rate auto negotiation operation
• Compatible to existing CAT-5 UTP cabling
• Fully compliant with IEEE802.3,IEEE802.3u, IEEE802.3ab
• Supports half / full duplex mode and 802.3x Flow Control
• Supports IEEE802.1P Layer2 Priority Encoding
• Supports IEEE 802.1Q VLAN tagging
• Transmit /Receive on-chip buffer support
• Crossover Detection and Auto Correction operation
• Supports power down/link down power saving
• Wake-on-LAN and remote wake-up function support



