WM20 – MANUAL CONTROLS INDUSTRIAL DEHUMIDIFIER USER MANUAL Drawing No.
IMPORTANT Your EIP Dehumidifier is packed in a plastic wrapper – please ensure that it is disposed of safely and where it will not be a danger to children INTRODUCTION Your EIP WM20 Dehumidifier is designed to help dry flooded or damp areas. Ideal where natural drying is just too slow. Drying with a dehumidifier enables fast drying without problems assosiated with heat drying plaster, etc can crack.
100mm 300mm 300mm Recommended Minimum Distances Mounting Hole Centres
OPERATING YOUR DEHUMIDIFIER The amount of moisture removed by your dehumidifier will vary according to the conditions in which it is operating. For example, operating in very cold temperatures will reduce water extraction levels. The time taken to dry an area will depend on the size of area to be dried and level of moisture to begin with.
Control Panel Layout Humidistat control knob.
USER MAINTENANCE ELECTRICAL CONNECTIONS AIR FILTER REMOVAL AND CLEANING The WM20 has a filter to remove dist from the air and also protect the unit. This requires cleaning and we recommend that the filter is inspected and cleaned every 4 weeks. Failure to do so will reduce the efficiency of your WM20. To access the filter the cover of the unit must first be removed.
IMPORTANT INFORMATION a) b) c) d) e) f) g) h) i) j) k) Do operate the dehumidifier with the covers removed This machine should be serviced by qualified personnel or other persons having technical competence servicing refrigeration equipment following the instructions in the EIP service manual. EIP service manuals and spares lists are available upon request. Do not use the machine if the power cord or cabinet are damaged. Do not poke objects into and of the grilles on the machine.
Ebac Industrial Products Ltd ST Helen Trading Est Bishop Auckland Co. Durham DL14 9AD Tel - 01388 664400 Fax – 01388 662590 www.eipl.co.
