Drawing No.
Drawing No. :- TPC316 Issue :- 7 Date :- 10/12/13 WM150 PACKAGE CONTENTS Item Description Quantity 10285GL-US Dehumidifier 1 3082214 Brass wood screws 4 3088525 Rawl plug 4 3086144 Quick release hose coupling 1 3944110 PVC tube – 3/8” I/D 7.
Drawing No. :- TPC316 Issue :- 7 Date :- 10/12/13 INTRODUCTION Designed for a wide range of applications, the WM150 is a rugged, industrial unit, which utilizes an energy-efficient compressor and a compact portable design to provide easy efficient drying.
Drawing No. :- TPC316 Issue :- 7 Date :- 10/12/13 SPECIFICATIONS MODEL: 10285GL-US HEIGHT: 26.7” (680 mm) WIDTH: 31.8” (810mm) DEPTH: 12” (305mm) WEIGHT: 81.
Drawing No. :- TPC316 Issue :- 7 Date :- 10/12/13 OPERATION The following procedures should be followed to test the WM150 for correct operation: 1. After unpacking, examine all external features to confirm damage-free shipment. Report all defects and damage at once. Connect the power cable to a grounded 13 Amp electrical socket CAUTION DO NOT REMOVE COVERS WHEN THE UNIT IS IN OPERATION 2. Check dehumidification process as follows: a. Place unit on a level surface. b.
Drawing No. :- TPC316 Issue :- 7 Date :- 10/12/13 INSTALLATION The WM150 Dehumidifier can be left free standing unit, alternatively can be wall mounted for instructions on mounting the unit please read the following: A full installation kit is included in the package to allow a problem free install.
Drawing No. :- TPC316 Issue :- 7 Date :- 10/12/13 ROUTINE MAINTENANCE WARNING ENSURE THE UNIT IS ISOLATED PRIOR TO CARRYING OUT ANY ROUTINE MAINTENANCE To ensure continued full efficiency of the dehumidifier, maintenance procedures should be performed as follows: 1. Clean the surface of the evaporator and condenser coils by blowing the dirt out from behind the fins with compressed air. Hold the nozzle of the air hose away from the coil to avoid damaging the fins. Alternatively, vacuum clean the coils.
Drawing No. :- TPC316 Issue :- 7 Date :- 10/12/13 REPAIRS 1. Should an electrical component fail, consult the Factory Service Center to obtain the proper replacement part. 2. If refrigerant gas is lost from the machine, it will be necessary to use a Refrigeration technician to correct the fault. Contact the Factory Service Center prior to initiating this action. Any competent refrigeration technician will be able to service the equipment. The following procedure must be used: a.
Drawing No. :- TPC316 Issue :- 7 Date :- 10/12/13 TROUBLESHOOTING SYMPTOM CAUSE Unit inoperative 1. No power to unit 1. 2. 3. 4. Little or no airflow Loose fan on shaft Fan motor burnt out Dirty refrigeration coils Loose electrical wiring 1. Insufficient air flow 2. Compressor fault 3. Loss of refrigerant gas Little or no water extraction Little or no defrost when required 1. Faulty timer 2. Faulty by-pass valve 1. Loose compressor Unit vibrates excessively 2.
Drawing No.
Drawing No.
Drawing No. :- TPC316 Issue :- 7 Date :- 10/12/13 UK Head Office American Sales Office German Sales Office Ebac Industrial Products Ltd St Helens Trading Estate Bishop Auckland County Durham DL14 9AD Ebac Industrial Products Inc 700 Thimble Shoals Blvd. Suite 109, Newport News Virginia, 23606-2575 USA Ebac Industrial Products Ltd. Gartenfelder Str.
