Operating Instructions

Page 6 of 12
Drawing : - TPC156
Issue : - 1
Date : - 04/11/03
OPERATION
Although the operation tests will differ depending on which control system is
being used, the basic points should be verified for correct operation
Fan Operation
Switch the unit on and ensure the airflow is discharged from the top of the
unit.
Heaters
Set the control system for “HEAT” and measure the heater current draw in
order to verify their operation
Compressor
Set the control system for “DRYING” and measure the compressor current
draw in order to verify their operation
Leave the unit running in the “DRYING” mode for approximately 30 minutes
after which check the drainage system for water leaks.