Brochure
SPECIFICATIONS
LIGHT AND GENTLE - CONSISTANT RESULTS
MF2 & MF2S TIMBER DRYER
SPECIFICATION MF2 MF2S
Model No. 1330300 1330100
Height (mm) 1,190 1,190
Width (mm) 1,100 1,100
Depth (mm) 460 460
Weight (kg) 118 118
Voltage 415 415
Phase 3 3
Frequency (Hz) 50 50
Current (A) 15 15
Drying Power (kW) 3.0 3.0
Heating Power (kW) 4.5 4.5
Total Power (kW) 8.0 8.0
Airflow (m3/hr) 3,000 3,000
Refrigerant R407c R407c
Maximum Operating Temperature (°C) 60 60
Maximum Water Extraction (l/d) 150 150
Maximum Wood Load - Depending on
species and thickness (m3)
40 40
FEATurES MF2 MF2S
Model No. 1330300 1330100
Compatible Controller BC BC
Twin Axial Fan Y Y
Stainless Steel Evaporator Coil N Y
Stainless Steel Drain Tray Y Y
Stoved Epoxy Finish Y Y
All Steel Construction Y Y
Plastic Coated Covers Y Y
TyPICAl DryING CAPACITIES MF2 MF23
Model No. 1330300 1330100
25mm Hardwood (m3) 13 13
50mm Hardwood (m3) 35 35
70mm Hardwood (m3) 56 56
25mm Softwood (m3) 3.5 3.5
50mm Softwood (m3) 9 9
70mm Softwood (m3) 15 15
COMPETENCE IN WOOD DRYING
Drying requirements are individual, therefore, EIPL supplies custom made drying systems
incorporating the MF timber dryers, which can be tailored to match your needs. The flexibility of the
EIPL range means that whether your requirements are for basic system or a large industrial kiln we
can provide an effective solution at a competitive price.
MF2 & MF2S TIMBER DRYER
The EIPL MF timber dryer systems utilize technology for economy, performance and longevity.
Components and materials have been specially selected for corrosion resistance (tannic acid)
which becomes particularly important if for instance beech or oak are being dried. EIPL dryers
quickly recover their investment costs, earning you profits
The MF2 and MF2S are rugged reliable timber drying systems designed for the larger wood
retailer or sawmill needing regular supplies of
thoroughly dried wood with minimal delay. The units
can be installed singularly, or in multiples to provide
a drying capacity to match any need.
The MF2 and MF2S dryers incorporate design
features which allows operation in the temperature
range of 60°C. At this temperature the wood will
release its moisture quickly and safely. Operation
at significantly higher temperatures requires
specialized refrigerants and inevitably frequent
servicing. EIPL wood dryers therefore operate in
the temperature range which is best compromise
between drying speed and machine reliability
The design of the MF2 and MF2S allows each unit to
operate effectively at low relative humidity levels.
This means you can be sure you wood is
thoroughly dried to low moisture contents,
ie 8% or less.