Brochure

Ebac Industrial Products Ltd
Miraustr 64-66, 13509, Berlin, Germany.
Tel: [phone] Fax: [phone] www.eip-ltd.de
ILLUSTRATED TYPICAL SYSTEM
The illustration shows a typical full drying system incorporating twin MF4 dryers. This typical
system has been implemented by many sawmills and moderate sized furniture production
facilities. In practice most drying systems do not require all the supplementary equipment shown.
EIPL will
recommend the
most appropriate
equipment for
each installation
on a case by case
basis.
Inside the drying
kiln space is a
premium, therefore
the slim shape
of the MF4 &
MF4S allows the
maximum possible
space for wood
being dried.
FLExIABLE AND PRECISE
All MF4 and MF4S dryers are able to produce the very chamber conditions you require. To avoid
degradation if must, of course, not be too harsh but just right for quick yet gentle drying. Even fresh
sawn wood and difficult to dry species, such as Oak, can be dried without damage
The flexibility or EIPL technology means that almost any wood processor can take advantage
of the benefits. Using the MF4 or MF4S older drying facilities can be modernized to the latest
technical standard. With the help of EIPL during the planning and installation phases, drying
equipment can be integrated into a “self built” chamber.
EIPL drying systems offer the correct solution at reasonable cost, together with a
comprehensive back-up service.
FULL FEATURE SYSTEMS
In addition to the basic drying and heating functions, the MF4 and MF4S
systems can incorporate a number of optional features from eth EIPL range
of supplementary equipment. If a source or economically generated heated
water is available on site, this energy can be used to heat the wood stack
using a model from our range of supplementary heaters.
To minimize further the modest running costs of MF4 & MF4S drying
systems, drying chambers should be well insulated. Overheating in warm
weather is prevented using the EIPL venting unit.
To ensure even distribution of heat throughout the wood stack,
it is necessary to install supplementary fans inside the
drying chamber. EIPL can supply suitable fans
from a range of specially selected high
temperature models.