Brochure

SPECIFICATION
Height: 24” (600mm)
Width: 12” (300mm)
Depth: 22” (550mm)
Weight: 82lbs. (37kg)
Airflow: 460CFM (800m³/hr)
Power Rating (Dryer): 320W (Max)
Power Rating (Heater): 350 (Operates Intermittently)
Power Requirements: 115V / 60Hz-7 amps
Maximum Operating Temperature: 113˚F (45˚C)
Control STC1 Controller (Supplied)
Finish Epoxy / Vinyl
Special Features Stainless steel water collection tray for corrosion resistance.
Drying chamber temperature indicator.
Powerful centrifugal fan for even drying.
LD82 WOOD DRYER
PRECISION DRYING THROUGH DEHUMIDIFICATION
SPECIFICATIONS
OPTIMUM CAPACITY
The EIPL LD800 has been designed to dry the following maximum wood loads:
1” Hardwood 800BF (66 cu ft)
2” Hardwood 1,750BF (146 cu ft)
3” Hardwood 2,900BF (246 cu ft)
1” Softwood 320BF (26 cu ft)
2” Softwood 700BF (58 cu ft)
3” Softwood 1,170BF (98 cu ft)
PACKAGED SYSTEMS
The LD82 with the STC1 Controller is all you
need to start drying wood. The STC1 controller
consists of a proportional timer to control the
drying cycle and a thermostat to control the
heating cycle. Extra equipment such as venting
units and supplementary heaters are normally
not required. The drying speed is controlled at
a rate which will not cause degrade, therefore
humidification equipment is unnecessary.