Brochure
SPECIFICATIONS
LIGHT AND GENTLE - CONSISTANT RESULTS
LD82 TIMBER DRYER
features LD82 LD82
Model No. 1302500 1320550
Compatible Controller STC1 BC
Centrifugal Fan Y Y
Copper Evaporator Coil Y Y
Stainless Steel Drain Tray Y Y
Stoved Epoxy Finish Y Y
All Steel Construction Y Y
Plastic Coated Covers Y Y
sPeCIfICatION LD82 LD82
Model No. 1302500 1320550
Height (mm) 600 600
Width (mm) 550 550
Depth (mm) 315 315
Weight (kg) 37 37
Voltage 230 230
Phase 1 1
Frequency (Hz) 50 50
Current (A) 5 5
Drying Power (kW) 0.35 0.35
Heating Power (kW) 0.35 0.35
Total Power (kW) 0.7 0.7
Airflow (m3/hr) 600 600
Refrigerant R134a R134a
Maximum Operating Temperature (°C) 55 55
Maximum Water Extraction (l/d) 13 13
Maximum Wood Load - Depending on
spices and thickness (m3)
N/A 0.5 - 3.0
COMPETENCE IN WOOD DRYING
Today it is essential that wood is technically dried prior to use. The condition of the wood and its drying
degree are decisive preconditions for the high quality of the final product. The EIPL LD82 is a powerful
and durable wood dryer and is particularly suitable for cabinet makers who work with small quantities
of wood. EIPL guarantees drying that is both economic and offers consistently good quality results.
LD82 TIMBER DRYER
Typically, green wood is available for significantly less than half the price of kiln dried material.
Considerable savings can, therefore, be made by drying your own wood, even after an allowance
has been made for modest running costs. Users of the LD82 often recover their investment within a
few months of installation.
The LD 82 has many advantages over other
drying solutions. The unit is very easy to
operate, attractively priced and with the
average daily energy consumption is under
10 kWh cheap to run.
Two control systems are available for
the LD82 timber dryer:- A low cost STC1
controller, consisting of a proportional timer
to control the drying cycle and a thermostat
to control the heating cycle and the fully
automatic, microprocessor controlled, BC
controller, which regulates the drying process
based upon the real time moisture content of
the timber being dried
We supply the machinery and you yourself
build the drying chamber according to the
instructions supplied by EIPL free of
charge.
tyPICaL DryING CaPaCItIes LD82 LD82
Model No. 1302500 1320550
25mm Hardwood (m3) 1.9 0.6
50mm Hardwood (m3) 4.1 1.7
70mm Hardwood (m3) 6.8 2.7
25mm Softwood (m3) 0.8 0.5
50mm Softwood (m3) 1.7 1.3
70mm Softwood (m3) 2.8 2.1