Operating Instructions

Page 3 of 20
Drawing : - TPC245
Issue : - 1
Date : - 13/10/03
OPERATION
These instructions must be read carefully and followed before setting
the system into operation. Ignoring this point Ebac will not be
responsible for any damage or warranty.
1 Foreword
These instructions are made to guarantee a safe and secure operation of the
machinery. It will help to avoid dangerous operations, minimise failures of the
machinery and give you a reliable system.
For further information the Ebac experts for after-sales-service are at your
disposal.
2 Introduction
The switchboard Ebac SCB 2016 had especially been constructed for the
control of the timber dryer Ebac FD 100. The built in control unit BC 2000
allows a fully automatically drying cycle.
In this switch board all the necessary elements are integrated, like protection
and security elements for the dryer, fans, venting unit, and when ordered also
for humidification or additional heating.
Ebac Industrial Products Ltd
St Helens Trading Estate
Bishop Auckland
County Durham
DL14 9AD
Tel: [phone]
Fax: [phone]
www.eipl.co.uk
[e-mail]