Brochure
SPECIFICATIONS
LIGHT AND GENTLE - CONSISTANT RESULTS
FD100 TIMBER DRYER
features fD100 fD100
Model No. 1322300 1322220
Compatible Controller STC1 BC
Centrifugal Fan Y Y
Copper Evaporator Coil Y Y
Stainless Steel Drain Tray Y Y
Stoved Epoxy Finish Y Y
All Steel Construction Y Y
Plastic Coated Covers Y Y
sPeCIfICatION fD100 fD100
Model No. 1322300 1322220
Height (mm) 820 820
Width (mm) 290 290
Depth (mm) 1,070 1,070
Weight (kg) 76 76
Voltage 230 230
Phase 1 1
Frequency (Hz) 50 50
Current (A) 13 13
Drying Power (kW) 1.0 1.0
Heating Power (kW) 1.5 1.5
Total Power (kW) 2.5 2.5
Airflow (m3/hr) 1,000 1,000
Refrigerant R134a R134a
Maximum Operating Temperature (°C) 55 55
Maximum Water Extraction (l/d) 45 45
Maximum Wood Load - Depending on
species and thickness (m3)
N/A 7.0
COMPETENCE IN WOOD DRYING
Today it is essential that wood is technically dried prior to use. The condition of the wood and its
drying degree are decisive preconditions for the high quality of the final product. The EIPL FD100
is a powerful and durable wood dryer and is particularly suitable for cabinet makers who work with
small quantities of wood. EIPL guarantees drying that is both economic and offers consistently good
quality results.
FD100 TIMBER DRYER
Typically, green wood is available for significantly less than half the price of kiln dried material.
Considerable savings can, therefore, be made by drying your own wood, even after an allowance
has been made for modest running costs. Users of the FD100 often recover their investment
within a few months of installation.
The FD100 has many advantages over other drying solutions. The unit is very easy to operate,
attractively priced and with the average daily energy consumption is under 10 kWh cheap to
run.
Two control systems are available for the
FD100 timber dryer:- A low cost STC1
controller, consisting of a proportional timer
to control the drying cycle and a thermostat
to control the heating cycle and the fully
automatic, microprocessor controlled, BC
controller, which regulates the drying process
based upon the real time moisture content of
the timber being dried
We supply the machinery and you yourself
build the drying chamber according to the
instructions supplied by EIPL free of charge.
tyPICal DryING CaPaCItIes fD100 fD100
Model No. 1322300 1322220
25mm Hardwood (m3) 7 3.5
50mm Hardwood (m3) 12 9.3
70mm Hardwood (m3) 21 14.8
25mm Softwood (m3) 3.3 0.8
50mm Softwood (m3) 7.6 2.1
70mm Softwood (m3) 12.7 5.7