Brochure

SPECIFICATIONS
SpecificationS eco150
Model no
.
10531GR-US
Height 35” (890mm)
Width 22.5” (575mm)
Depth 18.75” (480mm)
Weight 154 lbs (40kg)
Voltage 110 V
Phase 1
Frequency 60 Hz
Current 7 A
Power 800W
Airflow 384cfm (650m3/hr)
Noise Level 57 dba
Refrigerant R407c
Effective Volume 10,594 cu.ft (300m3)
Typical Extraction 80 ppd
Minimum Operating Temperature 33°F (1°C)
Maximum Operating Temperature 95°F (35°C)
featUReS eco150
Model no
.
10531GR-US
On / Off Control
4
Temperature Sensitive Defrost Control
4
Compressor Type Rotary
Fitted Mains Plug
4
Rugged Wheels
4
Hot Gas Defrost System
4
Hours Run Meter
4
Epoxy Powder Coating
4
Quite Operation
4
Lightweight Compact Portable
4
Low Amp Draw
4
Integral Condensate Pump
4
Pump Purge Switch
4
Quick Release Hose Coupling
4
25’ Length of PVC Drain Hose
4
Washable Filter
4
Ductable Outlet
4
ECO150 DEhumIDIFIEr
APPLICATION
EIPL are a recognized world wide supplier of flood restoration drying equipment. We offer
a variety of dehumidifiers and air movers to remove water and assist with drying areas
after water damage. Following a flood, whether it is in your basement or office, it’s vitally
important to restore the damaged area to good order as soon as possible to protect your
health from microorganisms, mold and bacteria that may grow and ultimately prevent
further damage.
KEY DESIGN FEATurES
• HighWaterExtraction&Low
Running Costs.
• HoursRunMeter.
• Highefficiencyrotarycompressor.
• IntegralCondensatePump
• TemperatureSensitiveDefrost
control for optimum performance.
• EIPL’sunique“ReverseCycle”
defrosting feature which
automatically melts away frost
buildup providing effective operation
at low ambient temperatures.
• Rugged,epoxypowder-coatedsteel
chassis and housing.
• WashableAirFilter.
• Simplicityofinstallationand
operation with a standard 115V plug.
A FULL RANGE OF, HIGH CAPACITY, LOW TEMPERATURE
DEHUMIDIFIERS FOR WATER DAMAGE RESTORATION