Brochure

Ebac Industrial Products Incorporated, 700 Thimble Shoals Blvd.
Suite 109, Newport News, VA 23606-2575
Tel: [phone] Fax: [phone] www.ebacusa.com
HOW A DEHUMIDIFIER WORKS
Process air is drawn into the
dehumidifier.
Process air passes over a wheel
impregnated with silica gel.
The silica gel absorbs the
moisture from the air.
Process air leaves the dehumidifier
as warm dry air.
The silica gel wheel continually rotates.
Regeneration air is heated to a high
temperature and passed over a
segment of the wheel.
Silica gel releases the moisture from
the wheel into the regeneration air.
Regeneration air leaves the
dehumidifier as warm wet air and
exhausted outside.
Applications DD3000 - DD12000
Offices
4
Shops
4
Restaurants
4
Warehouses
4
Basements
4
Factories
4
De-Flooding
4
Pharmaceutical
4
Defense Industry
4
Confectionary
4
Applications DD3000 - DD12000
Laboratories
4
Medical
4
Food Industry
4
Agriculture
4
Cold Stores
4
Hospitals
4
Hotels
4
Stadiums
4
Ships
4
WHY CHOOSE EIPL
EIPL is Europe’s leading manufacturer
of dehumidifiers and is a name
you can rely on. No matter how
extreme the conditions EIPL’s
efficiency copes comfortably even
at the coldest temperatures.
RUGGED CONSTRUCTION &
YEARS OF SERVICE
Over forty years of development experience means you can rely
on the proven track record of the EIP range of dehumidifiers. Every
dehumidifier is designed for efficiency and ruggedness, and built
to last. The popularity of EIP Ltd’s dehumidifiers with the plant hire
trade speaks for their reliability, portability and outstanding durability.
PROCESS
AIR IN
DRY AIR OUT
WET AIR
OUT
DD3000 - DD12000
The EIPL desiccant dehumidifiers all incorporate the well proven, Proflute / Munters desiccant wheels thereby
ensuring their products, as a minimum, equal performance to major competitors products. This range of large
desiccant dehumidifiers, have been designed to accommodate a wide range of regeneration heat sources,
ie electric, steam and gas, thereby ensuring a wide variety of installations are accommodated.
The programmable electronic controller, and high capacity EC process fan, allows easy installation
and also the flexibility for the end user to fine tune drying capacities catering
for, high extraction, high efficiency or deep drying, depending upon the final
application.
Facility for an external humidistat allows remote control of the drying cycle
All models incorporate a high efficiency patented PPS Rotor. This design
incorporates an 82% active Silica Gel to ensure optimum performance over
the equipments wide operating range of environments. All desiccant rotors
supplied by EIPL are washable, and designed for high performance / long life.
The chassis design incorporates access points for fork lifts and pallet trucks,
allowing for easy maneuvering into awkward site locations. All side
panels are removable, allowing for easy servicing and maintenance.
Should a fault arise various fault indicator lamps allow easy
diagnostics and thereby minimum downtime.