Brochure

Ebac Industrial Products Incorporated
Virgina Office :- 700 Thimble Shoals Blvd. Suite 109, Newport News, VA 23606-2575
California Office :- 2060 Chicago Ave, Suite C7, Riverside. CA 92507
Tel: [phone] Fax: [phone] www.ebacusa.com
provEn pErformAnCE
The EIPL CS90 dehumidifier is a stand alone solution to
your humidity problem. The unit is supplied with a internal
electronic humidistat, extra long power cord and integral
high lift condensate pump. This preassembly makes
the installation process simplistic, thereby reducing the
overall installation and project cost. The high efficiency
Rotary compressor ensures the maximum extraction
with the lowest running costs. The rubber anti-vibration
feet ensure any vibration is kept to a minimum and not
transmitted to / from the unit.
thE DEhumiDifiEr
EIPL dehumidifiers are effective solutions to environmental control problems. The CS range of units
are high capacity dehumidifiers, made to operate at high efficiencies by removing moisture from the
air through the refrigeration process. The fan draws the moist air through the cold evaporator coil,
which cools the air below its dew point. Moisture forms on the evaporator coil and is collected in the
condensate tray. The cooled air then passes through the hot condenser coil where it is reheated
using the same energy removed during the cooling phase, plus the additional heat generated
by the compressor. The air is, therefore, discharged from the dehumidifier at a slightly higher
temperature with a lower absolute humidity than that which entered. Continuous circulation
of air through the dehumidifier gradually reduces the relative humidity within the area.
Because the CS ranges of units are equipped with an internal electonic humidistat, they
automatically switch on and off to save energy and expense by maintaining the desired
level of humidity with intermittent operation.
The small compact size of the CS90 products, and remote monitoring feature
(via a smartphone app) of the CS90-E, make the unit and the ideal choice
for installations where access is limited i.e. loft installations, crawl
spaces etc.
thE problEm
Excess humidity in your crawl space, warehouse, office,
factory or shop results in corrosion, mold growth and
rotting. Enormous costs are incurred every year through
damage to inventory and through inflated building
maintenance costs as a result of dampness. Even if your
building seems dry during the day, at night when the
temperature falls, the humidity rises and the condensation
process begins. The compact physical size and high
performance makes the CS90 the ideal choice for areas
which require humidity control.
1. Air is drawn into the unit by a fan
2. Air passes over a cold surface
3. As the air is cooled, it’s moisture
condenses
4. Water falls into the container
5. Air is re-heated by the heat
recovery system
6. Air passes back into room 2°C
warmer and considerably dryer
7. Defrost system automatically
de-ices unit as necessary
8. Unit switches off automatically
when container is full
9. When the unit achieves the
selected level of dryness it
switches off automatically
FAN
MOIST
AIR
WARM
AIR
CONDENSER EVAPORATOR
WATER
COMPRESSOR
REFRIGERANT
CAPILLIARY
TUBE
HOW A DEHUMIDIFIER WORKS
Applications CS90-E CS90-H
Model No.
10590GE-US 10590GH-US
Offices
4 4
Laboratories
4 4
Basements
4 4
Storage Areas
4 4
Restaurants
4 4
Applications CS90-E CS90-H
Model No.
10590GE-US 10590GH-US
Bars
4 4
Museums
4 4
Locker Rooms
4 4
Computer Rooms
4 4
Basements
4 4