Brochure
CS90-H / CS90-E DEHUMIDIFIER
St Helen Trading Estate, Bishop Auckland, Co. Durham. DL14 9AD
Tel: 01388 664400 Fax: 01388 662590 Email: sales@eipl.co.uk www.eipl.co.uk
WHY THE NEED FOR A DEHUMIDIFIER?
The EIPL CS90 commercial/industrial dehumidifi er was designed to provide
energy effi cient humidity control in a wide range of applications including
offi ces, laboratories, apartments, storage areas, restaurants, bars, museums,
locker rooms, computer, telecommunication rooms and basements. It is a quiet,
high effi ciency, high capacity unit designed to suit your HVAC needs.
The range of EIPL dehumidifi ers are ideally suited to prevent condensation from
forming on windows, walls and ceilings by removing excess moisture. They will
also stop mold and mildew and eliminate rust and corrosion. .
KEY DESIGN FEATURES
Adjustable electronic humidistat to maintain the level of dryness, Integral
high lift condensate pump, EIP’s unique “Hot Gas” defrosting feature which
automatically melts away frost buildup providing effective operation at low
ambient temperatures.
Rugged, epoxy powder-coated steel chassis and housing,Adjustable humidistat for fully automatic
operation, High effi ciency rotary compressor, Simplicity of installation and operation with a standard
230V plug,Carrying handles, Inlet Air Filter.
CS90-H/E
EIPL dehumidifi ers are effective solutions to environmental control problems. The CS range of units
are high capacity dehumidifi ers, made to operate at high effi ciencies by removing moisture from the
air through the refrigeration process. The fan draws the moist air through the cold evaporator coil,
which cools the air below its dew point. Moisture forms on the evaporator coil and is collected in the
condensate tray.
The cooled air then passes through the hot condenser coil where it is reheated using the same energy
removed during the cooling phase, plus the additional heat generated by the compressor. The air
is, therefore, discharged from the dehumidifi er at a slightly higher temperature with a lower absolute
humidity than that which entered. Continuous circulation of air through the dehumidifi er gradually
reduces the relative humidity within the area. Because the CS ranges of units are equipped with an
internal electonic humidistat, they automatically switch on and off to save energy and expense by
maintaining the desired level of humidity with intermittent operation.
The small compact size of the CS90 products, and remote monitoring feature (via a smartphone app)
of the CS90-E, make the unit and the ideal choice for installations where access is limited i.e. loft
installations, crawl spaces etc.
TECHNICAL DATA:
SPECIFICATIONS CS90-H
10590GH-GB
CS90-E
10590GE-GB
Height (mm) 381 381
Width (mm) 356 356
Depth (mm) 559 559
Weight (kg) 38 38
Voltage (V) 230 230
Current (A) 3 3
Phase 1 1
Frequency (Hz) 50 50
Power (kW) 0.68 0.68
Airfl ow (m3/h) 390 390
Noise Level (dba) 50 50
Refrigerant R407c R407c
Effective Volume (m3) 250 250
Typical Extraction (27°C 60%RH) (lt/day) 30 30
Min Op Temp (°C) 3 3
Maxi Op Temp (°C) 35 35
FEATURES INCLUDE:
SPECIFICATIONS CS90-H
10590GH-GB
CS90-E
10590GE-GB
Electronic Humidity Control
Smartphone Interface
X
Datalogging Facility
X
ON/OFF Control
Reverse Cycle Defrost
Electronic Defrost Control
High Lift Condensate Pump
Power On Indicator
Free Standing
Wall Mounting Bracket
OO
High Level Safety Cut-Out Switch
Washabale Air Filter
Internal Safety Float Switch
Epoxy Powder Coating
All Steel Construction
APPLICATIONS CS90
Offi ces
Shops
Restaurants
Warehouses
Basements
Factories
De-Flooding
Sports Halls
Storage Areas
Swimming Pools
APPLICATIONS: