Brochure

Ebac Industrial Products Incorporated, 700 Thimble Shoals Blvd.
Suite 109, Newport News, VA 23606-2575
Tel: [phone] Fax: [phone] www.ebacusa.com
PROvEN PERFORMANCE
The EIPL CS60 dehumidifier is a stand alone solution to
your humidity problem. The unit is supplied with a pre-
wired, internal humidistat, extra long power cord and
external condensate connection point. This preassembly
makes the installation process simplistic, thereby
reducing the overall installation and project cost.
The high efficiency Rotary compressor ensures the
maximum extraction with the lowest running costs.
The rubber anti-vibration feet ensure any vibration
is kept to a minimum and not transmitted to / from
the unit.
The DehumiDifier
EIPL dehumidifiers are effective solutions to environmental control problems. The CS ranges of units
are high capacity dehumidifiers, made to operate at high efficiencies by removing moisture from the
air through the refrigeration process. The fan draws the moist air through the cold evaporator coil,
which cools the air below its dew point. Moisture forms on the evaporator coil and is collected in the
condensate tray. The cooled air then passes through the hot condenser coil where it is reheated
using the same energy removed during the cooling phase, plus the additional heat generated
by the compressor. The air is, therefore, discharged from the
dehumidifier at a slightly higher temperature with a
lower absolute humidity than that which entered.
Continuous circulation of air through the dehumidifier
gradually reduces the relative humidity within the
area. Because the CS ranges of units are equipped
with an internal humidistat, they automatically switch
on and off to save energy and expense by maintaining
the desired level of humidity with intermittent
operation.
The small compact size of the CS60 make the unit the
ideal choice for installations where access is limited
i.e. crawl spaces etc.
THE PRObLEM
Excess humidity in your crawl space, warehouse, office,
factory or shop results in corrosion, mold growth and
rotting. Enormous costs are incurred every year through
damage to inventory and through inflated building
maintenance costs as a result of dampness. Even if your
building seems dry during the day, at night when the
temperature falls, the humidity rises and the condensation
process begins. The compact physical size and high
performance makes the CS60 the ideal choice for areas
which require humidity control.
1. Air is drawn into the unit by a fan
2. Air passes over a cold surface
3. As the air is cooled, it’s moisture
condenses
4. Water falls into the container
5. Air is re-heated by the heat
recovery system
6. Air passes back into room 2°C
warmer and considerably dryer
7. Defrost system automatically
de-ices unit as necessary
8. Unit switches off automatically
when container is full
9. When the unit achieves the
selected level of dryness it
switches off automatically
FAN
MOIST
AIR
WARM
AIR
CONDENSER EVAPORATOR
WATER
COMPRESSOR
REFRIGERANT
CAPILLIARY
TUBE
HOW A DEHUMIDIFIER WORKS
Applications CS60
Model No. 10264CS-US
Offices
4
Laboratories
4
Basements
4
Storage Areas
4
Restaurants
4
Applications CS60
Model No. 10264CS-US
Bars
4
Museums
4
Locker Rooms
4
Computer Rooms
4
Basements
4